The Hatco Glo-Ray built-in heated shelf has a HardCoat aluminum top and blanket-type foil element for uniform heat. Fiberglass insulation keeps heat at the holding surface while a built-in adjustable thermostat controls surface temperature. This product is recommended for use in metallic counters. For other surfaces, verify that the material is suitable for temperature up to 180°F (82°C). deal for pass thru areas, buffet lines or as a heated work shelf. The Built-in Heated Shelf models feature a hard coated aluminum top and blanket-type foil element for uniform heat distribution. Available as flush top or 1/2 inch (13 mm) recessed models and also featuring a 3 foot (914 mm) flexible conduit channels the power lines from the shelf to a remote control enclosure. The control enclosure comes with a control thermostat with a range of 80° to 181°F (27°to 83°C), an illuminated on/off switch, and mounting brackets. The attached control enclosure can be mounted remotely up to 3 feet (914 mm)from the unit. The 6-foot (1829 mm) cord and plug is attached to easily reach the power source. The Built-in Heated Shelf has a 3/4 inch(19 mm) flanged edge that allows the unit to fit into a countertop opening. The Heated Shelf is easy-to-clean with a soft damp cloth or non-abrasive cleaner. Please note that Hatco or KaTom is not responsible for counter damage caused by heat from this warmer, so please use discretion in determining if this heated shelf works for your needs.
- Glo-Ray® Drop In Heated Shelf with Flush Top
- 61-1/2 in. x 31-1/2 in.
- Surface area
- HardCoat aluminum top
- Control thermostat
- Illuminated on/off switch and mounting bracket
- 1750 watts
Glo-Ray Drop In Heated Shelf w/Flush Top, 61-1/2" x 31-1/2", surface area, hardcoat aluminum top, control thermostat, illuminated on/off switch & mounting bracket, 1750 watts.
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Hatco GRSBF-60-O SpecificationsPDF Spec Sheet