The Hatco Glo-Ray Built-in Heated Shelf has a HardCoat aluminum top and blanket-type foil element for uniform heat. Fiberglass insulation keeps heat at the holding surface while a built-in adjustable thermostat controls surface temperature. This Hatco Glo-Ray® drop in heated shelf is recommended for use in metallic counters. For other surfaces, please verify that the material is suitable for temperatures up to 180°F (82°C). Ideal for pass-through areas, buffet lines or as a heated work shelf. The Built-in Heated Shelf models feature a hard coated aluminum top and blanket-type foil element for uniform heat distribution. Available as flush top or 1/2 inch(13 mm) recessed models and also comes with a 3-foot (914 mm) flexible conduit channels the power lines from the shelf to a remote control enclosure. The control enclosure comes with a control thermostat with a range of 80° to 181°F (27° to 83°C), an illuminated on/off switch and mounting brackets. The attached control enclosure can be mounted remotely up to 3 feet (914 mm) from the unit. Also included is a 6-foot (1829 mm) cord and plug that is attached to easily reach the power source. The built-in heated shelf has a 3/4 inch (19 mm) flanged edge that allows the unit to fit into a countertop opening. This Hatco Glo-Ray® Built-In Heated Shelf is easy-to-clean with a soft damp cloth or non-abrasive cleaner.
- Glo-Ray® Drop In Heated Shelf with Flush Top
- 49-1/2 in. x 17 in.
- Surface area
- HardCoat aluminum top
- Control thermostat
- Illuminated on/off switch and mounting bracket
- 770 watts
Glo-Ray Drop In Heated Shelf w/Flush Top, 49-1/2" x 17", surface area, hardcoat aluminum top, control thermostat, illuminated on/off switch & mounting bracket, 770 watts.
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Hatco GRSBF-48-F SpecificationsPDF Spec Sheet
|Product Type||Food Warmers|