MODEL N8768N - N8700N Series, Narrow Drop-In Individually-Controlled Electric Food Wells, Hot Food Well Unit, 3 Pan Size
Product Shown Model N8746N
Good, Basic, Cold Storage
- Top shall be one-piece 18-gauge stainless steel, with 0.63' overhang around perimeter and die stamped 19.87' x 11.87' (50.5 cm x 30.2 cm) openings with depressed edges. Formed well below each opening shall be 6.25' (15.9 cm) deep. Each well shall have an individual infinite control and 1000 watt heating element attached to bottom of well. Exterior housing shall be 20-gauge galvanized steel. Unit shall be insulated on sides and between wells with 1.00' (2.5 cm) fiberglass; bottom shall have 1.00' (2.54 cm) blanket insulation.
- Unit shall have all individual controls wired to a control panel for mounting in counter or at a remote location; 4' (1.2 m) length of wiring and conduit are provided. Unit shall have a three wire electrical junction box to allow hard-wiring at installation.
Options & Accessories
- Adapter plates and bars
- Single- or double-service flip-up sneeze guards
- Telescoping covers
- Drains and manifold.
* Inclusion of this option will alter the electrical specifications of the unit.
Photo May Include Optional Accessories!
Narrow Drop-In Hot Food Well Unit, Electric, individual pan design, wet or dry type, 3-pan size for 12" x 20" pans, infinite controls, stainless steel top & inner liner, galvanized outer liner, (66-1/2" x 15" cutout required), cUL, UL, NSF, 208-230v/60/1ph
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Delfield N8768N SpecificationsPDF Spec Sheet
|Warranty||1 year limited parts & labor|
|Specialty Options||Wet or Dry|