Product Shown Model N8259
Good, Basic, Cold Storage
- Top is one-piece, 18-gauge stainless steel. Top has a drain trough and 2' (5.1cm) overhang around perimeter. Top is elevated 1.68' (2.5cm) above counter surface. Underside of frost top is sealed with refrigeration lines and insulated with high-density, closed-cell polyurethane. Exterior housing is 22- gauge galvanized steel.
- Condensing unit unit is suspended below the frost top on a 16-gauge steel frame. Condensing unit uses HFC-404a refrigerant. Unit has an ON/OFF toggle switch, an 8' (2.4m) cord and NEMA 5-15 plug. Unit has (1) stainless steel louver provided for field installation; cutout dimensions are 12' x 23.5' (30.5cm x 59.7cm). A second opening at the rear of the cabinet is provided at installation to allow for proper air circulation.
Options & Accessories
- Single or double service flip-up sneeze guards
- Relocate compressor
- *220V/50 cycle electrical system
* Inclusion of this option will alter electrical specifications of the unit.
Photo May Include Optional Accessories!
Drop-In Frost Top, stainless steel 1" elevated top with drain trough & 2" overhang, galvanized steel exterior housing, on/off toggle switch, self-contained refrigeration, 1/4 hp, (30-3/4" x 25" cutout required), cUL, UL, NSF , 115v/60/1ph
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Delfield N8231 SpecificationsPDF Spec Sheet
|Compressor Location||Built In|
|Width (in) Range||20 - 32 in|