The Delfield D4432N-12M Mega Top sandwich prep table holds 12 sixth-size, 4-inch deep pans in the top opening. With adapter bars, the pans stay in place. Holding temperatures are improved by the dual level pan brackets since they lower the pans an additional inch. To prevent product contamination, the pans are covered with a roll back lid. Product in the top is held at temperatures between 33 and 41 degrees Fahrenheit.
The base has a top drawer can hold two 12-inch-20-inch pans with a 4- to 6-inch depth, while the bottom drawer accommodates two 12-inch-by-20-inch-by-4-inch pans. With an ABS liner in the drawers, they are easy to clean and resist chipping and denting. Constructed of stainless steel, the drawer frames and exterior are heavy duty for commercial applications. Recessed grip handles make it easy to access product.
Cold temperatures are produced by R404A refrigerant, and product stays cold without drying out thanks to an air screen. Moving the Delfield D4432N-12M Mega Top salad prep table is simple since it has four 5-inch casters. It can be placed against a wall or in a lineup since it has a front breathing design.
- (12) sixth-size, 4-in. deep pans are accommodated in the top opening
- Pans fit easily in the opening with adapter bars
- Dual level pan brackets hold the pans an inch lower to improve holding temperatures
- Product stored in the top is protected by a lid
- Foamed-in-place polyurethane insulation retains cold temperatures
- Provides precise temperature management with the ACT solid state electronic control
- Top, front, and sides are made of stainless steel to resist corrosion and minor damage
- Mobility is provided by (4) 5-in. casters
- 115 V/60 Hz/1 ph, 7.2 A, 1⁄5 HP, 6-ft. cord with a NEMA 5-15P plug
- Overall Dimensions: 32.13 in. W x 31.5 in. D x 44.54 in. H
- UL and cUL listed; NSF certified
Two Base Drawers
- Top drawer accommodates (2) 12-in. x 20-in. pans with a 4-6-in. depth (Sold separately)
- Bottom drawer holds (2) 12-in. x 20 in. x 4 in. pans (Sold separately)
- ABS plastic liner covers the interior to simplify cleanup and add durability
- Corrosion-resistant stainless steel exterior supports commercial applications
- Structural strength is provided by the stainless steel frame
- Easy to open with recessed grip handles
- 33-41 degrees F temperature in the top opening
- 36-40 degrees F temperature in the cabinet
- Cold temperatures are provided by the R404A refrigerant
- Capillary tube system controls the flow of refrigerant
- Air screen keeps the food cold without drying
- Front breathing design allows for placement in a line up, installation against a wall, or cabinet installation
32-in. Cutting Board
- Mounted on the top front edge to easily prep ingredients
- Harmful bacteria is kept from spreading with the built-in antimicrobial agent
- Polyethylene construction is durable for heavy use
- Dishwasher safe
- Cutting Board Dimensions: 32 in. L x 8 in. W x 1⁄2 in. H
Mega Top Refrigerator, single-section, 32" W, 10.10 cubic feet, (2) drawers, stainless steel top with polyethylene cutting board & (12) 1/6 size plastic pans, ABS interior sides, stainless steel front & sides, 5" casters, front-breathing rear-mounted (R404A) refrigeration system, 1/5 hp, cUL, UL, NSF, 115v/60/1ph
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Delfield D4432N-12M SpecificationsPDF Spec Sheet
|Cutting Board Depth (in.)||8|
|Warranty||3 year parts & labor/5 year compressor|
|Width (in) Range||16 - 36 in|
|Product Type||Commercial Refrigeration|