MODEL 4448N8 - 48' Sandwich/Salad Top Refrigerator Top, 8 Pan, Front-Breathing Flat Top Refrigerated Bases
Good, Basic, Cold Storage
- Exterior Top top is one-piece 22-gauge stainless steel with integral 2.12' (5.1cm) square nosing on the front. Top has openings to accept 8 or 12 1/6-size 4'- 6'(10.1cm - 15.2cm) deep plastic pans. Adapter bars and 1/6 pans are supplied by Delfield. Lid is constructed of 20-gauge stainless steel. Temperature in top opening to maintain 33 degree F (1 degree C) to 41 degree F (5 degree C), with pans recessed 2.5' (6.4cm) at 86 degree F ambient room temperature, meeting NSF 7 requirements. One 48' x 10' x .5' (121.9cm x 25.4cm x 1.3cm) plastic cutting board is mounted on the top at the front edge.
- Exterior back and bottom are two piece 24-gauge galvanized steel. Exterior ends are stainless steel.
- Interior Sides are thermoformed ABS plastic with integral shelf supports. Base is fully insulated with high- density foamed in place polyurethane.
- Door has a 22-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf.
- Refrigeration system uses HFC-404A refrigerant. Compressor is 1/4 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coils and temperature control are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36 degree F to 40 degree F (2 degree C to 4 degree C).
- Electrical connection is 115 volt, 60 Hertz, single phase. Unit has an 8' (2.4m) long electrical cord and NEMA 5-15P plug.
- Casters: Equipment is mounted on 2' (5.08cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5' (6.35cm).
- Drawers have 22-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 14-gauge stainless steel. Drawer slides are 14-gauge stainless steel with stainless steel bearings. Each top drawer holds one full size 12' x 20 (30.5cm x 50.8cm) pan 4'- 6' (10.1cm - 15.2cm) deep. Each bottom drawer holds one 12' x 20 (30.5cm x 50.8cm) pan 4' (10.1cm) deep. Pans are supplied by others.
Options & Accessories
- 4' x 2' stainless steel back-splash
- Flat lift off cover' 18' wide single tier over-shelf
- Stainless steel finish on back
- Plastic laminate on front
- Additional wire shelves
- Door lock
- *220V/50 Hertz electrical system
* Inclusion of this option will alter electrical specifications of the unit.
Photo May Include Optional Accessories!
Sandwich/Salad Top Refrigerator, two-section, 48" W, 16.0 cubic feet, (2) doors, stainless steel top with polyethylene cutting board & (8) 1/6 size plastic pans, ABS interior sides, stainless steel front & sides, 5" casters, front-breathing rear-mounted refrigeration system, 1/5 hp, cUL, UL, NSF, 115v/60/1ph
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Delfield 4448N-8 SpecificationsPDF Spec Sheet
|Cutting Board Depth (in)||10|
|Cover Type||Lift Up|
|Warranty||3 year parts & labor/5 year compressor|