In your restaurant or place of business, you need an area to clean up the soiled dishes. With Advance Tabco Regaline Sinks, you have a stainless steel 3 compartment sink with dual side drain boards. The overall dimensions are 109 in. L x 31 in. W x 42 in. H. and have a one piece deep drawn sink bowl. Each bowl has dimensions of 18 in. x 24 in. x 15 in. With a commercial Regaline Sink that is fully TIG welded and with a polished satin finish, this Advance Tabco commercial 3 compartment sink is all you need in restaurant or commercial sink ware!
- Bowl Dimensions: 18" x 24" x 15"
- 12" Water level accommodates pot & dish applications.
- Overall Dimensions: 109" L x 31" W x 42" H
- 37" working height
- Tile edge for ease of installation.
- One piece Deep Drawn sink bowl.
- Integral drain board with splash
- All sink bowls have a large liberal 3" radius.
- Placement of the welded leg assembly ensures stability and furnishes direct support of the column load requirement for the entire sink unit.
- 1 5/8" diameter galvanized legs and gussets
- 1" adjustable plastic bullet feet
- Bowls are heavy gauge stainless steel type 304 series
- Drain boards, splash and rolled rims are fabricated using heavy gauge stainless steel type 304 series
- All TIG welded.
- Welded areas blended to match adjacent surfaces and to a satin finish.
- Gussets welded to a die-embossed reinforcing channel..
Regaline Sink, 3-compartment, with 24" left & right-hand drainboards, 24" front-to-back x 18" W compartment, 12" deep, with 8" high splash, galvanized tubular legs with plastic feet, 18 gauge 304 series stainless steel, overall 31" F/B x 109" L/R
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Advance Tabco T9-63-54-24RL-X SpecificationsPDF Spec Sheet
|Overall Length (in)||109|
|Sink Length (Side to Side)||18|
|Sink Width (Front to Back)||24|
|Stainless Steel Gauge||18 gauge|
|Stainless Steel Grade||304 Series|
|Drainboard Location||Both Sides|