The Advance Tabco FE-3-1812-18RL compartment sink has three 18-inch-long-by-18-inch-wide-by-12-inch-deep bowls for cleaning and sanitizing dishes. The sink bowls have coved corners that do not collect debris and aid in cleaning, with basket drains in each bowl to remove waste and dirty water. A rolled rim edge gives the unit additional strength, and the 9-inch backsplash protects walls from water damage.
The Advance Tabco FE-3-1812-18RL three-compartment sink has 8-inch on-center holes for faucet installation, but it does not come with a faucet. A drainboard is located on each side of the unit for soiled and clean dishes. The sink is constructed of 18-gauge, 304 series stainless steel for a long life and rust resistance. It has been TIG welded, which provides a more precise weld, and the welded areas have been blended to match surrounding surfaces.
- 3 sink bowls
- 18-ga., 304 series stainless steel construction
- TIG welded for smooth finish
- Welded areas blended to match adjacent surfaces
- 18-in. right- and left-sided drainboards
- 9-in. backsplash with tile edge
- 3⁄4-in. coved corners in sink bowls eliminate crevices to simplify cleaning
- Rolled rim edge provides strength
- 15⁄8-in.-dia. galvanized steel legs with 1-in. plastic bullet feet that adjust to level on uneven floors
- Galvanized steel gussets welded to reinforced plate
- 8-in. faucet holes on-center
- Faucet not included
- 1⁄2-in. IPS hot and cold supply
- 11⁄2-in. IPS basket-type waste drains in the center of the bowls
- NSF certified
- Sink bowls: 18 in. L x 18 in. W x 12 in. D
- Overall: 90 in. L x 233⁄4 in. W x 431⁄2 in. H
Check out our sinks and accessories buyers' guide to learn more about compartment sinks.
Special Value Fabricated NSF Sink, 3-compartment, 18" right & left drainboards, bowl size 18" x 18" x 12" deep, 18 gauge 304 stainless steel, tile edge splash, rolled edge, faucet holes on 8" centers, galvanized legs, 1" adjustable plastic bullet feet, NSF, overall 23-3/4" F/B x 90" L/R
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Advance Tabco FE-3-1812-18RL SpecificationsPDF Spec Sheet
|Overall Length (in)||90|
|Sink Length (in)||18|
|Sink Width (in)||18|
|Sink Depth (in)||12|
|Stainless Steel Gauge||18 gauge|
|Stainless Steel Grade||304 Series|
|Backsplash Height (in)||9"|
|Product Type||Commercial Sinks|