The sink bowl in the Advance Tabco FE-1-1824-24R one-compartment sink has coved corners that eliminate difficult-to-clean crevices. A basket-type waste drain in the bowl keeps large debris out of the drain system, and a backsplash prevents water and soap from soaking the wall. A tile edge is built into the backsplash, enabling flush installation against surfaces at the unit's rear. A 24-inch drainboard on the right side of the bowl can be used to hold soiled or drying clean dishes.
Since the sink is all TIG welded, it is durable for high-volume use. TIG welding is a form of arc welding that uses tungsten electrodes to generate heat and produce a strong weld. Its 18-gauge stainless steel is 18 percent chromium and 8 percent nickel, which ensures superior protection against rust. This Advance Tabco FE-1-1824-24R compartment sink has adjustable bullet feet that maintain stability on uneven surfaces.
- Sink bowl has coved corners, eliminating crevices that could trap debris
- 24-in. drainboard on the right side can hold clean or dirty dinnerware
- 9-in. backsplash prevents splashes from reaching the wall
- Tile edge on the backsplash can be lined up flush to a rear wall
- Made of corrosion-resistant, 18-ga. 304 stainless steel
- All TIG welded to enhance structural strength
- Welds are blended to match adjacent surfaces with a satin finish
- Rolled rim edge increases durability along the front
- 1⁄2-in. IPS hot and cold supply
- 1⁄2-in. IPS basket-type waste drain
- 8-in. on-center faucet holes (faucet sold separately)
- Adjustable bullet feet stabilize the unit on most floors
- NSF certified
- Bowl: 18 in. L x 24 in. W x 14 in. D
- Overall: 441⁄2 in. L x 293⁄4 in. W x 431⁄2 in. H
You can read more about the types of commercial sinks in this sink resource guide.
Special Value Fabricated Sink, 1-compartment, 24" right drainboard, bowl size 18" x 24" x 14" deep, 18 gauge 304 stainless steel, tile edge splash, rolled edge, 8" OC faucet holes, galvanized legs with 1" adjustable plastic bullet feet, overall 29-3/4" F/B x 44-1/2" L/R, NSF
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Advance Tabco FE-1-1824-24R SpecificationsPDF Spec Sheet
|Overall Length (in)||23|
|Sink Length (in)||18|
|Sink Width (in)||24|
|Sink Depth (in)||14|
|Stainless Steel Gauge||18 gauge|
|Stainless Steel Grade||304|
|Backsplash Height (in)||9|
|Product Type||Commercial Sinks|