The Advance Tabco FC-2-2424-24R compartment sink has two large bowls and a right-sided drainboard. A pre-punched backsplash protects the wall from any water or grease splatters, while a durable rolled rim holds in overflowing water. Made completely of corrosion-resistant stainless steel, it withstands high-volume use, and its bullet feet provide it with stability on most uneven surfaces. Since it is made from 16-gauge steel, it is thinner and less expensive than 14-gauge steel.
- Stainless steel is resistant to corroding, scarring, and warping
- 16-ga. material is sturdier than 18-ga. and more cost-efficient than 14-ga.
- TIG-welded areas are blended to a satin finish that melds with the adjacent surfaces
- Rolled rim supports extra strength
- 24-in. drainboard on the right side for dishes
- 15⁄8-in.-dia. legs have 1-in. bullet feet that keep the unit level
- NSF certified
Bowls and Backsplash
- (2) 14-in.-deep sink bowls
- Bowls have 3⁄4-in. coved corners for cleanup
- Installation-friendly tile on the backsplash enables placement flush to a wall
- Backsplash prepared with 2 holes for faucet mounting (faucet sold separately)
- 8 in. between the hole centers
- 1⁄2-in. IPS hot and cold faucet supply
- 11⁄2-in. IPS basket-type waste drain
- Sink bowls: 24 in. L x 24 in. W x 14 in. D
- Overall: 741⁄2 in. L x 30 in. W x 43 in. H
If you're struggling to decide on a sink, this commercial sinks resource article explains them further.
Fabricated Sink, 2-compartment, 24" right drainboard, bowl size 24" x 24" x 14" deep, 16 gauge 304 stainless steel, tile edge splash, rolled edge, 8" OC faucet holes, stainless steel legs with 1" adjustable stainless steel bullet feet, overall 29-1/2" F/B x 74-1/2" L/R, NSF
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Advance Tabco FC-2-2424-24R SpecificationsPDF Spec Sheet
|Overall Length (in)||74.5|
|Sink Length (in)||24|
|Sink Width (in)||24|
|Sink Depth (in)||14|
|Stainless Steel Gauge||16 gauge|
|Stainless Steel Grade||304 Series|
|Backsplash Height (in)||8.5"|
|Drainboard Length (in)||24"|
|Specialty Options||All Stainless Construction|
|Product Type||Commercial Sinks|