The Advance Tabco FC-2-2424-18R-X two-compartment sink is made of seamless 16-gauge stainless steel and is all TIG welded with a satin finish. This material resists bends, dings, and rust but is not as thick as 14-gauge units. A rolled edge adds to its durability while keeping water off the floor, and a backsplash prevents water from splattering onto the wall. The Advance Tabco FC-2-2424-18R-X compartment sink has a backsplash with faucet holes and a tile edge that speeds up the installation process. With its right-end drainboard and adjustable feet, this unit can hold dishes or food stably.
- Stainless steel minimizes the risk of dings, scrapes, and rust
- 16-ga. metal is less expensive than 14 ga. and more durable than 18 ga.
- Welded areas are blended to a satin finish that fits with other surfaces
- Rolled rim edge provides extra strength
- Raised edge prevents water from dripping to the floor
- 18-in. drainboard on the right side
- Legs are 15⁄8 in. dia.
- 1-in. adjustable bullet feet stabilize the unit
- NSF certified
Bowls and Backsplash
- 2 sink bowls
- Bowls’ 3⁄4-in. coved corners reduce debris buildup
- Backsplash's tile edge ensures quick installation
- 2 holes in the backsplash for setting up a faucet (faucet is sold separately)
- 8 in. from the center of one hole to the center of the other
- 1⁄2-in. IPS hot and cold faucet supply
- 11⁄2-in. IPS basket-type waste drains
- Sink bowls: 24 in. L x 24 in. W x 14 in. D
- Overall: 681⁄2 in. L x 30 in. W x 43 in. H
If you're having trouble choosing a sink, check out this commercial sinks resource article, which discusses the benefits of different types.
Fabricated Sink, 2-compartment, 18" right drainboard, bowl size 24" x 24" x 14" deep, 16 gauge 304 stainless steel, tile edge splash, rolled edge, 8" OC faucet holes, stainless steel legs with 1" adjustable stainless steel bullet feet, overall 30" F/B x 68" L/R, NSF
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Advance Tabco FC-2-2424-18R SpecificationsPDF Spec Sheet
|Overall Length (in)||68|
|Sink Length (in)||24|
|Sink Width (in)||24|
|Sink Depth (in)||14|
|Stainless Steel Gauge||16 gauge|
|Stainless Steel Grade||304|
|Backsplash Height (in)||8.5|
|Drainboard Length (in)||18|
|Special Features||All Stainless Construction|
|Product Type||Commercial Sinks|