The Advance Tabco FC-2-2424-18RL compartment sink has two sink bowls for twice the food-prepping space. Each bowl has coved corners that facilitate cleaning by eliminating debris-trapping crevices. A raised border spans the length of the unit to stop water from sloshing onto the floor, and a tall backsplash protects the wall from splatter. This Advance Tabco FC-2-2424-18RL two-compartment sink is made of strong 16-gauge stainless steel, which is thinner than 14-gauge options but thicker than 18 gauge. Its rolled rim edge creates a more durable unit that can survive impacts better than a flat-edged sink. The backsplash comes prepared for mounting a faucet, and its tile edge aids in the installation process.
- Stainless steel resists bending, denting, and corroding
- Strong 16-ga. steel is thinner but more cost-efficient than 14 ga.
- Welded seams are blended to look like adjacent areas
- Durable rolled rim edges
- Raised edges trap water to facilitate cleaning
- Both ends have an 18-in. drainboard
- Legs have a 15⁄8-in. dia.
- 1-in. bullet feet can be adjusted to compensate for uneven surfaces
- NSF certified
Backsplash and Sink Compartments
- (2) 14-in.-deep compartments
- Bowls have 3⁄4-in. coved corners that are unlikely to accumulate debris
- Backsplash has a tile edge for installation
- Backsplash has 2 holes to attach a faucet (faucet sold separately)
- 8-in. between the middle of one hole and the middle of the next
- 1⁄2-in. IPS hot and cold faucet supply
- 11⁄2-in. IPS basket waste drains
- Sink bowls: 24 in. L x 24 in. W x 14 in. D
- Overall: 84 in. L x 30 in. W x 43 in. H
For more detailed information on sinks, check out this explainer article on commercial sinks.
Fabricated Sink, 2-compartment, 18" right & left drainboards, bowl size 24" x 24" x 14" deep, 16 gauge 304 stainless steel, tile edge splash, rolled edge, 8" OC faucet holes, stainless steel legs with 1" adjustable stainless steel bullet feet, overall 29-1/2" F/B x 84" L/R, NSF
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Advance Tabco FC-2-2424-18RL SpecificationsPDF Spec Sheet
|Overall Length (in)||84|
|Sink Length (in)||24|
|Sink Width (in)||24|
|Sink Depth (in)||14|
|Stainless Steel Gauge||16 gauge|
|Stainless Steel Grade||304 Series|
|Backsplash Height (in)||8.5"|
|Drainboard Location||Both Sides|
|Drainboard Length (in)||18"|
|Specialty Options||All Stainless Construction|
|Product Type||Commercial Sinks|