The Advance Tabco BEV-30-60R beverage table features a deep-drawn sink, storage shelves, and functional outlet for equipment. The sink measures 14 inches by 16 inches with a 12-inch depth and is deep-drawn to eliminate seams for a more sanitary bowl. The sink cabinet has a front hinge door and open back to make accessing and installing plumbing fixtures easy and a partial undershelf to provide storage. Because a GFI duplex electrical outlet has been mounted on the backsplash, this table can be used with beverage equipment for coffee or another drink service. A bottom and intermediate shelf run the length of the unit and provide storage for the supplies and accessories your beverage service will require.
The table is furnished with a no-drip countertop and a 10-inch backsplash that helps contain spills and splashes, as well as a drain trough built into the countertop's left side. The Advance Tabco BEV-30-60R unit is constructed of stainless steel and TIG welded, with the back, sides, and shelves welded together to create a sturdy work station. The unit is further stabilized by legs with adjustable feet for level installation.
- Beverage table with shelf storage
- GFI duplex electrical outlet is mounted on the backsplash to accommodate beverage equipment
- No-drip countertop has a square edge and 10-in. backsplash
- Deep-drawn sink bowl right of the table measures 14 in. L x 16 in. W x 12 in. D
- Gooseneck faucet is splash-mounted 4 in. on center with 1⁄2 in. hot and cold supply
- 11⁄2-in. IPS basket drain plate
- Front hinge door on sink cabinet
- Rear of sink cabinet is not enclosed
- Partial undershelf for storage in cabinet sink
- Stainless steel, bolt-on legs have an adjustable 11⁄2-in. hex foot
- Unit is TIG welded and the sides, back, and shelves are welded together for stability
- Top of the table and other exposed areas are polished to a satin finish and sound deadened
- Mirror finish on the countertop edge
- Roll formed, embossed, galvanized hat channels are attached to the table top with weld studs and structural adhesive
- Overall Dimensions: 60 in. L x 30 in. W x 451⁄2 in. H
- NSF Certified
Beverage Table, 60"W, with 14" x 16" x 12" deep sink on right with faucet 4"OC, urn trough 5" x 24" with no splash drain plate, 14 gauge 304 series stainless steel top with no drip counter top edge, 10" x 2" back splash, enclosed stainless steel base with bottom & intermediate undershelves, stainless steel legs
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Advance Tabco BEV-30-60R SpecificationsPDF Spec Sheet
|Location||Right Side Sink|
|Specialty Options||Drain Trough|
|Specialty Options||Duplex Outlet|
|Product Type||Commercial Work Table|