Perfect for washing, rinsing, and sanitizing dishes in one unit, the Advance Tabco 4-43-72 sink has three compartments. Each compartment is 24 inches wide by 24 inches deep, and a 6-inch backsplash keeps messes contained to the bowls. It is all heliarc welded, so it has durability for heavy use. All the welded areas are blended and have a satin finish to match the adjacent surfaces. This Advance Tabco 4-43-72 three-compartment sink is made of stainless steel with galvanized legs. Adjustable bullet feet on the legs stabilize the unit on uneven floors.
- Stainless steel construction provides strength and facilitates cleaning
- Heliarc-welded construction creates structure for commercial applications
- Areas that are welded have a blended, satin finish to match the other surfaces
- 6-in. backsplash prevents water from soaking the wall and floor
- Comes with 11⁄2-in. IPS basket-type waste drains
- 1⁄2-in. hot and cold supply
- Faucet holes are punched on 8-in. centers (faucet is sold separately)
- 1-in. adjustable bullet feet on the galvanized legs balance on non-level floors
- Bowl dimensions: 24 in. L x 24 in. W x 13 in. D
- Overall dimensions: 72 in. L x 271⁄2 in. W x 39 in. H
Square Corner Scullery Sink, 3-compartments, 24"W x 24"D front-to-back x 13" deep sink compartments, 6"H backsplash, 1-1/2 IPS waste drain baskets included, 16 gauge 430 stainless steel, galvanized legs with plastic bullet feet, 27-1/2" F/B x 72" L/R (overall) (requires 2 faucets)
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Advance Tabco 4-43-72 SpecificationsPDF Spec Sheet
|Overall Length (in)||72|
|Sink Length (Side to Side)||24|
|Sink Width (Front to Back)||24|
|Stainless Steel Gauge||16 gauge|
|Stainless Steel Grade||430 Series|
|Specialty Options||Corner Sink|