The Advance Tabco 4-42-48 two-compartment sink is made of stainless steel, so it resists corrosion and facilitates cleaning. With its all heliarc-welded construction, the unit is heavy duty and can support use in commercial establishments. The welded areas have been blended to a satin finish to match the adjacent surfaces. The unit has a 6-inch backsplash, keeping messes contained to the two bowls and off the floor. There are adjustable bullet feet on this Advance Tabco 4-42-48 two-compartment sink that enable it to be installed on most floors.
- Corrosion-resistant stainless steel construction is heavy duty and easy to clean
- All heliarc welded to provide structure that supports commercial use
- Welded areas are blended to a satin finish that matches the adjacent surfaces
- 6-in. backsplash prevents water and liquids from creating messes on the floor
- 11⁄2-in. IPS basket-type waste drains are included
- 1⁄2-in. hot and cold supply
- Holes for a faucet are punched on 8-in. centers (faucet is sold separately)
- 1-in. adjustable bullet feet on the galvanized legs add balance for uneven floors
- Bowl dimensions: 24 in. L x 24 in. W x 13 in. D
- Overall dimensions: 48 in. L x 271⁄2 in. W x 39 in. H
Square Corner Scullery Sink, 2-compartments, 24"W x 24"D front-to-back x 13" deep sink compartments, 6"H backsplash, 1-1/2 IPS waste drain baskets included, 16 gauge 430 stainless steel, galvanized legs with plastic bullet feet, 27-1/2" F/B x 48" L/R (overall)
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Advance Tabco 4-42-48 SpecificationsPDF Spec Sheet
|Overall Length (in)||48|
|Sink Length (Side to Side)||24|
|Sink Width (Front to Back)||24|
|Stainless Steel Gauge||16 gauge|
|Stainless Steel Grade||430 Series|
|Specialty Options||Corner Sink|