Hobart FP150-2 1-Speed Continuous Feed Food Processor w/ Side Discharge, 220-230v/1ph
$5,892.00 /Each
Contact us for details!
Selected Voltage: 220-230V, 1 Phase
| 220-230V, 1 Phase |
| 120V, 1 Phase |
Ship times may vary due to supply chain constraints. Please contact our Sales Team if you need this item in a specified time frame.
Non Returnable Item
Hobart FP150-2 Description
Designed to efficiently prepare sliced carrots, diced onions, and other prepped vegetables, the Hobart FP150-2 food processor utilizes a gravity-fed design for continuous produce preparation. This design is facilitated by its angled body, which points at 50 degrees towards the operator. Its full-size hopper is removable, meaning users can access it by lifting its hinged lid and can remove it to clean off any remaining food particles. To ease the cleaning process, its body is made of aluminum, which also confers a high level of durability and corrosion resistance. Meant for use on countertops, its body measures 8 1⁄4 inches wide by 18 5⁄8 inches deep by 20 1⁄4 inches tall, rests on four rubber feet, and features a 6-foot-long cord.
Designed with efficiency and safety in mind, the Hobart FP150-2 single-speed food processor powers its stainless steel cutting surface using a 1⁄2-horsepower motor that only activates when all three of its safety interlock systems are cleared. This motor is powered using a planetary gears transmission system and can be activated or disabled using the on and off buttons (green for on, red for off). While active, it can quickly chop through up to 14 pounds of product in a minute, though its overload protection module will disable the unit if too much is put into it at one time.
- 14 lb. per minute production capacity
- 50-degree angled construction
- Full-size removable hopper with side discharge
- Cutting surfaces made of stainless steel
- Transmission using planetary gears
- Triple design safety interlock
- Aluminum body rests on rubber feet
- Green on switch and red off switch
- Planetary drive
- Hinged lid
- 8 1⁄4 in. W x 18 5⁄8 in. D x 20 1⁄4 in. H
- 4.8 A, 1⁄2 HP
- 220-230v/50/60/1-ph, 6-ft. cord with NEMA 5-15P plug
*Image may not depict product color, inclusions or accessories.
*Free shipping on Hobart FP150-2 within the 48 contiguous states.
From The Manufacturer
Food Processor - Unit Only, angled continuous feed design, full-size hopper, 14 lb per/min production cap., 420 rpm, stainless steel cutting surfaces, planetary gear transmission, triple safety interlocks, aluminum housing, rubber feet, 220-230v/50/60/1-ph, 1/2 HP, 4.8 amps, UL, NSF
Watch a video about this product
Hobart FP150-2 Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Hobart |
| Discharge | Side Chute |
| Hertz | 50/60 |
| Hourly Output | 840-lb |
| HP | 0.5 |
| No. of Speeds | 1 |
| Phase | 1 |
| Product | Food Processors |
| Product Type | Food Prep Equipment |
| RPM | 420 |
| Type | Continuous Feed |
| Voltage | 220/230 |
| Warranty | 1-year |
| Weight | 41.00 |
Important Prop 65 information for California residents.
- 5
- 4
- 3
- 2
- 1
Review this product!
