Refrigerator, Pass-Thru, 1 Section, SS Half Front/Glass Rear Doors, 31 cu ft

MODEL TR1RPT-2HS-1G

STANDARD FEATURES:

• Oversized and balanced, environmentally friendly 134A refrigeration system - holds food safe 33° F to 38° F.
• Exterior - 300 series stainless steel front, doors, sides, top and bottom (the finest stainless available).
• Interior - 300 series stainless steel side walls, door liner & floor.
• Recessed handles  on solid doors (lifetime guaranteed).
• Door locks standard.
• Exterior mounted digital electronic thermometer with manual defogger.
• Fluorescent interior lighting; patented, integrated door light (IDL) standard on glass doors.
• Wide door openings.
• Glass condensate pan to prevent electrolysis.
• Magnetic door gaskets.
• Epoxy coated evaporator.
• (1) interior kit option included per section at no charge.
  (4) different interior kits available.
• Pilasters and tray slides/shelving factory installed at no charge. Kit selection must be indicated at time of order.
• Extruded, aluminum door frames on swing glass doors.
• 4" diameter swivel castors standard equipment - locking castors provided for front set.
• Hot gas condensate for energy efficiency.
• Positive seal self-closing doors with factory tested (over 1,000,000 times) lifetime guaranteed door hinges and torsion type closure system.
• Foamed-in-place polyurethane high density cell insulation (CFC free).
• Top mounted unit positioned out of food zone to maximize storage capacity.
• Self-contained system. 1 year parts & labor warranty (USA). 5 year compressor warranty (USA).. 
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty (USA).

REFRIGERATION SYSTEM:

• Oversized refrigeration system factory balanced using CFC free 134A refrigerant.

• Top mounted condensing unit.

• Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain food safe 33° to 38° F interior cabinet temperature.

• Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.

CABINET CONSTRUCTION:

• Exterior - 300 series stainless steel front, shroud and doors. 300 series stainless steel exterior ends, top, back, and bottom.

• Interior - 300 series stainless steel interior cabinet side walls, back, door liner and floor. Construction of liner in accordance with NSF standards.

• Barrel locks standard. Locks keyed alike.

• Digital exterior temperature monitor with manual defogger control, large LED display for quick and easy temperature identification.

• Cabinet mounted on a welded, galvanized frame rail, enamel dipped and baked for permanent bond on all surfaces, provides additional corrosion protection. Frame rail fitted with 4" diameter polyolefin castors, (front castors include brakes).

DOORS:

• Glass doors: Double pane, Low-E, thermal insulated glass. Glass assembly within extruded aluminum frame, with reinforcing backing plates in each corner. Glass assembly replaceable without removing the door from hinges. Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 15" long handle of same material as door frame. 

• Solid doors: 300 series stainless steel exterior with 300 series stainless steel interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction. The face of each door fitted with a 12" long recessed handle with interlock (lifetime guarantee on all handles and door hardware). Handles are foamed-in-place to insure permanent attachment.

• Lifetime guaranteed adjustable torsion type closure system with extruded aluminum and stainless steel supports. 

INSULATION:

• Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

• Heavy gauge full or half height pilasters and tray slides/shelving factory installed at no charge.

• Interior kit must be indicated at time of order. Note: Tray slide sets and shelves can also be ordered individually.

• (1) interior kit option included per section at no charge.
  (4) different interior kits available. See optional accessories section.

LIGHTING:

• Safety shielded fluorescent interior lighting. Integrated door light standard on glass doors.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.

• A sole use circuit is required.
   

OPTIONAL ACCESSORIES:  (At Extra Cost - Lead Time May Apply)

• 6" stainless steel legs.

• Seismic/Flanged legs.

• Kit #1 (9 sets of #1 type tray slides).

• Kit #2 (rod type 1 set covers 1/2 section).

• Kit #3 (6 sets of universal type tray slides).

• Kit #4 (3 chrome shelves and shelf supports).

• Stainless steel (electro polished) shelves.

• Chrome shelves.

• Metal handle (solid doors only). 

• Electronic temperature control.

• Universal pan slides.

• #1 pan slides.

• #2 or rod style pan slides.

• Curb mountable units.

• Export units available - consult factory.

• Correctional facility options - consult factory.

• Remote cabinets available (contact factory technical services for BTU information).

CLICK IMAGE FOR LARGER VIEW