Refrig/Freezer, Reach-In, 2 SS Half Doors,13 Refrig/13 Frzr cubic ft.

True - Model 598-TR1DT2HS

KaTom Price $4,480.44

Priced Per: Each

Retail Price: $12,783.00

You Save: 65%

Quantity in Basket: none

Read about Huge Tax Savings!

Calculate Shipping

Add product to basket to estimate shipping.

TR-Series: Dual Temperature


TRUE is the world's largest
manufacturer
of glass door merchandisers.




THIS PRODUCT TYPICALLY SHIPS IN 5-10 DAYS
 

DUAL TEMPERATURE REACH-IN REFRIGERATOR / FREEZER
13 Cubic Ft. - Refrigerator
13 Cubic Ft. - Freezer
 

MODEL TR1DT-2HS

STANDARD FEATURES:

  • Two, independent, self-contained, oversized and balanced, environmentally friendly refrigeration systems (refrigerator 134A; freezer R404A) - top refrigerator holds 33° to 38° bottom freezer holds -10°.
  • Exterior - 300 series stainless steel front, doors, sides, top, bottom and back (the finest stainless available).
  • Interior - 300 series stainless steel side walls, back, door liner & floor.
  • 300 series stainless steel doors with recessed handles (lifetime guaranteed).
  • Door locks standard.
  • Two exterior mounted digital electronic thermometers with manual defogger.
  • Single power cord for two compressors. 
  • Foamed-in-place polyurethane high density cell insulation (CFC free).
  • (1) interior kit option included per section at no charge. (4) different interior kits available.
  • Pilasters and tray slides/shelving factory installed at no charge. Kit selection must be indicated at time of order.
  • Standard back guard - improves airflow in freezer compartment.
  • Epoxy coated evaporator.
  • Compartmentalized, Incandescent interior lighting (one for each door).
  • 4" diameter swivel castors standard equipment - locking castors provided for front set.
  • Hot gas condensate for energy efficiency.
  • Positive seal self-closing doors with factory tested (over 1,000,000 times) lifetime guaranteed door hinges and torsion type closure system.
  • Top mounted unit positioned out of food zone to maximize storage capacity.
  • Self-contained system.
  • 1 year parts and labor warranty (USA).
  • 5 year compressor warranty (USA).
 
 

REFRIGERATION SYSTEM:

  • Two independent, self-contained refrigeration systems CFC free environmentally friendly and factory balanced. 134A refrigerator (top) refrigerant - R404A freezer (bottom) refrigerant.

  • Top mounted condensing unit.

  • Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain 33° to 38° (refrigerator) and -10° (freezer) interior cabinet temperature.

  • Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion. 

CABINET CONSTRUCTION:

  • Exterior - 300 series stainless steel front, shroud and doors. 300 series stainless steel exterior ends, top, back, and bottom.

  • Interior - 300 series stainless steel interior cabinet side walls, back, door liner and floor. Construction of liner in accordance with NSF standards.

  • Barrel locks standard. Locks keyed alike.

  • Digital exterior temperature monitor with manual defogger control, large LED display for quick and easy temperature identification.

  • Cabinet mounted on a welded, galvanized frame rail, enamel dipped and baked for permanent bond on all surfaces, provides additional corrosion protection. Frame rail fitted with 4" diameter polyolefin castors, (front castors include brakes).

DOORS:

  • 300 series stainless steel exterior with 300 series stainless steel interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction.

  • Lifetime guaranteed adjustable torsion type closure system with extruded aluminum and stainless steel supports. The face of each door fitted with a 12" long recessed handle with interlock (lifetime guarantee on all handles and door hardware). Handles are foamed-in-place to insure permanent attachment.

INSULATION:

  • Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

  • Heavy gauge full or half height pilasters and tray slides/shelving factory installed at no charge.

  • Interior kit must be indicated at time of order. Note: Tray slide sets and shelves can also be ordered individually.

  • (1) interior kit option included per section at no charge.
    (4) different interior kits available. See optional accessories section.

  • Standard back guard in freezer compartment improves airflow.

LIGHTING:

  • Compartmentalized, incandescent interior lighting (one for each door). Lights activated by rocker switch mounted above door(s).

ELECTRICAL CHARACTERISTICS:

  • Unit completely pre-wired at factory, and ready for final connection to a dedicated outlet. A cord and plug set to be included.

  • A sole use circuit is required.
     

OPTIONAL ACCESSORIES:  (At Extra Cost - Lead Time May Apply)

  • 6" stainless steel legs.

  • Seismic/Flanged legs.

  • Kit #1 (9 sets of #1 type tray slides).

  • Kit #2 (rod type 1 set covers 1/2 section).

  • Kit #3 (6 sets of universal type tray slides).

  • Kit #4 (3 chrome shelves and shelf supports)

  • Stainless steel (electro polished) shelves.

  • Chrome shelves.

  • Metal handle (solid doors only).

  • Cam lift hinge (solid door models only).

  • Electronic temperature control.

  • Universal pan slides.

  • #1 pan slides.

  • #2 or rod style pan slides.

  • Curb mountable units.

  • Export units available - consult factory.

  • Correctional facility options - consult factory.

  • Remote cabinets available (contact factory technical services for BTU information). 

CLICK IMAGE FOR LARGER VIEW

TOP VIEW SPECIFICATIONS CLICK TO ENLARGEELEVATION SPECIFICATIONS, CLICK TO ENLARGE!

 

ROUGH - IN DATA
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8"
Model
Doors
Capacity
(Cu. Ft.)
 
Dimensions
(Inches)
 
HP Volts PH Amps NEMA
Config.
Cord
Length
(feet)
 
Crated
Weight
 
Ref. Freezer L D H * Ref Freezer
TR1DT-2HS 2 13 13 29 34 3/4 78 1/4 1/5 1/3 115 1 13.2 5-20 9 430

* Height does not include 5" for castors or 6" for optional legs.
Depth does not include 1 3/8" for rear freezer condensate enclosure.

 

 

Model Front Right Plan 3D
TR1DT-2HS TFQH01E TFQH01S TFQH01P TFQH013
 
 

View Installation Manuals for True Refrigeration Equipment

Product Specifications

  • Product Spec Sheet
  • Crated Weight: 480.00 lbs.
  • Category: Dual Temp & Pass Through
  • Compressor: Top Mount
  • Construction: All Stainless
  • Doors: Half
  • Door Type: Solid Door
  • Sections: 1 Section
  • Type: Dual Temp
  • Manufacturer: True
  • Also Known As: TR1DT2HS, TR1DT-2HS, TRUTR1DT2HS, TRUE TR1DT-2HS, 890TR1DT2HS

Customer Reviews

Average Customer Review: Not yet rated

Write an online review and share your thoughts with others.

There are no reviews

Related Item(s)

Product Categories: True TR Dual Temps  Dual Temp Refrigeration 

Do you have a question or comment about product code 598-TR1DT2HS?

Type your question here to receive an answer by email or request a phone call.