|
TRUE is the world's largest
manufacturer
of glass door merchandisers.

THIS PRODUCT TYPICALLY SHIPS IN 5-10 DAYS
|
GLASS 3 DOOR TOP MOUNT REFRIGERATOR
74 CUBIC FT.
|
MODEL TM-74G |
|
STANDARD FEATURES:
- Designed using the highest quality materials and components to provide the user with colder product temperatures, lower utility costs, superior food safety and the best value in today's food service marketplace.
- Oversized, factory balanced, refrigeration system holds 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.
- Energy efficient, Low-E double pane thermal glass doors.
- Adjustable, heavy duty PVC coated shelves.
- Positive seal self-closing doors. Lifetime guaranteed door hinges and torsion type closure system.
- Entire cabinet structure is foamed-in-place using high density, CFC free, polyurethane insulation.
|
|
| |
 |
|
|
|
REFRIGERATION SYSTEM:
-
Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 134A refrigerant.
-
Extra large evaporator coil balanced with higher horsepower compressor and large condenser; maintains 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.
-
Sealed, cast iron, self-lubricating evaporator fan motor and larger fan blades give True reach-ins a superior low velocity, high volume airflow design. This unique design insures faster temperature recovery and shorter run times in the busiest of food service environments.
-
Top-mounted condensing unit.
CABINET CONSTRUCTION:
-
Exterior - 300 series stainless steel door and shroud. Anodized quality aluminum exterior ends and back.
-
Interior - attractive, NSF approved, white aluminum liner. 300 series stainless floor with coved corners.
-
Insulation - entire cabinet structure and solid door are foamed-in-place using high density, CFC free, polyurethane insulation.
-
Cabinet mounted on a welded, heavy duty galvanized frame rail. Rail dipped in rust inhibiting enamel paint for corrosion protection inside and out.
-
Frame rail fitted with 4" (102 mm) diameter stem castors - locks provided on front set.
DOORS:
-
Low-E double pane thermal glass assemblies with extruded aluminum frames. Door locks standard.
-
Positive seal self-closing doors. Lifetime guaranteed door hinges and torsion type closure system.
-
Each door fitted with 15" (381 mm) long extruded aluminum handle.
-
Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning.
SHELVING:
-
Nine (9) adjustable, heavy duty PVC coated wire shelves 24 1/8"L x 22 3/8"D (613 mm x 569 mm). Four (4) chrome plated shelf clips included per shelf.
-
Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on 1/2" (13 mm) increments.
|
LIGHTING:
MODEL FEATURES:
-
Exterior mounted temperature monitor.
-
Evaporator is epoxy coated to eliminate the potential of corrosion.
-
NSF-7 compliant for open food product.
ELECTRICAL CHARACTERISTICS:
-
Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.
-
A sole use circuit is required.

OPTIONAL ACCESSORIES:
(At Extra Cost - Lead Time May Apply)
-
6" (153 mm) standard legs.
-
6" (153 mm) seismic/flanged legs.
-
Additional shelves.
-
Half door bun tray racks. Holds up to eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately).
-
Full door bun tray racks. Holds up to twenty-two 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately).
-
Novelty baskets.
-
Remote cabinets (condensing unit supplied by others), consult factory technical service department for BTU information
|
|
CLICK IMAGE FOR LARGER VIEW
 

|
|
ROUGH - IN DATA |
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" .
|
| Model |
Glass
Doors |
Capacity
(Cu. Ft.)
(liter) |
# of
Shelves |
Cabinet Dimensions
(Inches)
(mm) |
HP |
Volts |
|
Amps |
NEMA
Config. |
Cord
Length
(feet)
(total m) |
Crated
Weight
(kg) |
| L |
D |
H * |
| TM-74G |
3 |
74 |
9 |
78 1/8 |
29 3/4 |
78 1/4 |
1/2 |
115/60/1 |
|
11.8 |
5-15P |
9 |
683 |
| |
|
2096 |
|
1985 |
756 |
1988 |
|
|
|
|
|
2.74 |
310 |
|
Depth does not include 1 3/8" (35 mm) for door handles.
* Height does not include 5" (127mm) for castor height or 6" (153mm) for optional legs. |
|
|
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only) |
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE |

|
Model |
Elevation |
Right |
Plan |
3D |
| TM-74G |
TFEY72E |
TFEY72S |
TFEY72P |
TFEY723 |
|
| |
 |
|
|