Heated Cabinet, Roll-Thru, 1 Section/2 Doors, Ramps, 38 cu ft, 89in H - Restaurant Equipment at KaTom Restaurant Supply


	TG Series - Heated Cabinet

True introduces its latest offering designed specifically to meet the needs of consultants.

Photo May Include Optional Accessories!

THIS PRODUCT TYPICALLY SHIPS IN 5 - 10 DAYS

roll-thru Solid Door Heated Cabinet 89" HIGH
2 Door
37 Cubic Feet

MODEL TG1HRT891S1S

STANDARD FEATURES:

Provides cabinet holding temperature of 80˚F to 180˚F (26.67˚C to 82.22˚C).
Internal fan provides low velocity, forced-air heat distribution to assure even temperatures throughout the cabinet.
(2) stainless steel 1000 watt finned tube heating elements per section for uniform generation of electric heat. Cabinet comes with a total of 2000 watts.
300 series stainless steel door, front, and bottom. The very finest stainless; higher tensile strength for fewer dents and scratches.
Anodized aluminum interior cabinet liner. 300 series stainless steel door liner and floor with coved corners.
(3) lifetime guaranteed, cam-lift hinges per door. Full 180 degree open capability with a stay open feature at 120 degrees.
Designed to accept roll-in racks (inboard castors) with a maximum dimensions of 27"L x 29"D x 66"H (686 mm x 737 mm x 1677 mm). (1) heavy gauge stainless steel ramp standard per door.
Entire cabinet structure and solid door is foamed-in-place using high density, CFC free, polyurethane insulation.

Features, Options & Specifications Subject to Change Without Notice.

OPTIONAL ACCESSORIES: Up-charge and lead times may apply.
Metal door handle. Export units - consult factory.	Prison package options - consult factory. Remote cabinets (condensing units supplied by others), consult factory technical service department for BTU information.

CLICK IMAGE FOR LARGER VIEW

ROUGH - IN DATA

This Product is recommended for commercial purposes only.

Specifications subject to change without notice
Chart dimensions rounded up to the nearest 1/8"

Model	Doors	Capacity (Cu. Ft.)	Dimensions (Inches)			Watts	Volts	Amps	NEMA Config.	Cord Length (total feet)	Crated Weight
			L	D	H *
TG1HRT891S1S	1 front/1 rear	38	35	36 7/8	89	2000	115/208-240/1	8.3	14-20P	9	500
* Height does not include 1" for system mechanical components. Requires 115/208 -240/60 Hz, single phase, 3 pole, 4 wire circuit.

WARRANTY One year warranty on all parts & labor and an additional 4 year warranty on compressor. (U.S.A. only)	SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE		Model	Elevation	Right	Plan	3D
	SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE		TG1HRT891S1S	TFQY83E	TFQY85S	TFQX61P	TFQY853