Refrig, Pass-Thru, 1 Section, SS Front/Glass Rear Doors, 31 cu ft

REFRIGERATION SYSTEM

Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 134A refrigerant.

Extra large evaporator coil balanced with higher horsepower compressor and large condenser maintains cabinet temperatures of 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.

Sealed, cast iron, self-lubricating evaporator fan motor(s) and larger fan blades give True reach-ins a more effi cient low velocity, high volume airflow ow design. This unique design ensures faster temperature recovery and shorter run times in the busiest of food service environments.

Top mounted refrigeration system with evaporator positioned out of food zone to maximize capacity.

Hot gas condensate for energy efficiency.

CABINET CONSTRUCTION

Exterior - 300 series stainless steel door, front, sides, back and bottom.

Interior - NSF approved, white aluminum side walls and back liner. 300 series stainless steel door liner and fl floor with coved corners.

Insulation - entire cabinet structure and solid door are foamed-in-place using high density, CFC free, polyurethane insulation.

Welded, heavy duty galvanized frame rail dipped in rust inhibiting enamel paint for corrosion protection inside and out.

Frame rail fitted with 4" (102 mm) diameter stem castors - locks provided on front set.

DOOR

300 series stainless steel exterior and liner. Door opens within cabinet dimensions.

Door lock standard.

Lifetime guaranteed recessed door handle. Door fitted with 12" (305 mm) long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment.

Positive seal self-closing door with 120° stay open feature. Lifetime guaranteed door hinges.

Magnetic door gasket of one piece construction, removable without tools for ease of cleaning.

SHELVING

Three (3) heavy duty PVC coated wire shelves 25" x 27-3/4" (635 mm x 705 mm). Four (4) shelf supports included per shelf (field installed). Shelves adjustable on 6" (153 mm) increments.

Four (4) different interior kits available (see Kit Options). Pilasters and tray slides require field installation.

LIGHTING

Incandescent interior lighting - light activated by rocker switch mounted above door, safety shielded.

MODEL FEATURES

Exterior, digital temperature display, available with either °F or °C.

Evaporator is epoxy coated to eliminate the potential of corrosion.

NSF-7 compliant for open food product.

ELECTRICAL

Unit completely pre-wired at factory and ready for fi final connection to a 115/60/1 phase - 15 amp dedicated outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES
Up-charge and lead time may apply.

230-240V / 50 Hz.

6" (153 mm) standard legs.

6" (153 mm) seismic/flanged legs.

6" (153 mm) stainless steel legs.

Additional shelves.

Stainless steel rail skirt for use with legs field installed).

Metal door handle (factory installed).

Electronic temperature control (factory installed).

Curb mountable units.

Remote cabinets (condensing unit supplied by others), consult factory technical service department for BTU information.

KIT OPTIONS

Kit #1: Nine (9) sets of #1 type tray slides (factory installed), bottom support of (1) 18" L x 26" D (458 mm x 661 mm) pan or (2) 14" L x 18" D (356 mm x 458 mm) pans.

Kit #2: One (1) set half-section #2 steel rod tray slides (factory installed), rim support of (1) 18" L x 26" D (458 mm x 661 mm) pan.

Kit #3: Six (6) sets of universal type tray slides (factory installed), bottom support of (1) 18" L x 26" D (458 mm x 661 mm) pan, (2) 12" L x 20" D (305 mm x 508 mm) pans or (2) 14" L x 18" D (356 mm x 458 mm) pans.

Kit #4: Three (3) chrome shelves 25" L x 27-3/4" D (635 mm x 705 mm). Four (4) shelf supports included per shelf. Shelves adjustable on 6" (153 mm) increments.

Additional kit option components available individually.

Click Image for Larger View

Rough - In Data

• Model: TA1RPT-1S-1G
• Doors: 1 solid front & 1 glass rear
• Capacity (Cu. Ft.): 31
• # of Shelves: n/a
• Dimensions (Inches):
  • L: 29
  • D*: 37-1/2
  • H** : 78-1/4
• HP: 1/2
• Volts:115/60/1
• Amps: 10.4
• NEMA Config.: 5-15
• Cord Length (total feet): 9

• This Product is recommended for commercial purposes only.
• Specifications subject to change without notice.
• * Depth does not include 1-3/8" for glass door handle.
• ** Height does not include 5" for castors or 6" for optional legs.
• ** Height does not include 1" for system mechanical components.