Refrigerator, Reach-In, 1 Section/Glass Door, 3 Shelves, 31 cu ft

MODEL TA1R-1G

STANDARD FEATURES:

• Oversized and balanced, environmentally friendly 134A refrigeration system - holds food safe 33° F to 38° F.
• Exterior - 300 series stainless steel exterior front, sides, top, bottom and back (the finest stainless available).
• Interior - NSF approved, white vinyl coated aluminum sides. 300 series stainless floor and door liner.
• Double pane, Low-E thermal insulated glass doors.
• Door locks standard.
• Exterior mounted digital electronic thermometer with manual defogger.
• Fluorescent interior lighting; patented, integrated door light (IDL) standard.
• Wide door openings.
• Glass condensate pan to prevent electrolysis.
• 4" diameter swivel castors standard equipment - locking castors provided for front set.
• (3) heavy duty, vinyl coated shelves per section (shipped separately) (3) different interior kits available. Kit selection must be indicated at time of order.  (field installation required).
• Magnetic door gaskets.
• Epoxy coated evaporator.
• Hot gas condensate for energy efficiency.
• Positive seal self-closing doors with factory tested (over 1,000,000 times) lifetime guaranteed door hinges and torsion type closure system
• Extruded aluminum door frames.
• Foamed-in-place polyurethane high density cell insulation (CFC free).
• Top mounted unit positioned out of food zone to maximize storage capacity.
• Self-contained system.
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty (USA).

CABINET CONSTRUCTION:

• Exterior - 300 series stainless steel front, shroud and doors. 300 series stainless steel exterior ends, top, back, and bottom.

• Interior - NSF approved, white vinyl coated aluminum interior side walls and back. 300 series stainless steel interior door liner and 300 series stainless steel floor. Construction of liner in accordance with NSF standards.

• Barrel locks standard. Locks keyed alike.

• Digital exterior temperature monitor with manual defogger control, large LED display for quick and easy temperature identification.

• Cabinet mounted on a welded, galvanized frame rail, enamel dipped and baked for permanent bond on all surfaces, provides additional corrosion protection. Frame rail fitted with 4" diameter polyolefin castors, (front castors include brakes).

DOORS:

• Double pane, Low-E thermal insulated glass. Glass assembly within extruded aluminum frame, with reinforcing backing plates in each corner. Glass assembly replaceable without removing the door from hinges.

• Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 15" long handle of same material as door frame.

INSULATION:

• Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

• (3) heavy duty, vinyl coated wire shelves per section (shipped separately).
  (3) different interior kits available. See optional accessories section. (field installation required).

• Optional interior kit must be indicated at time of order. Note: Tray slide sets and shelves can also be ordered individually.

LIGHTING:

• Safety shielded fluorescent interior lighting. Integrated door light standard.

REFRIGERATION SYSTEM:

• Oversized refrigeration system factory balanced using CFC free 134A refrigerant.

• Top mounted condensing unit.

• Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain food safe 33° F to 38° F interior cabinet temperature.

• Evaporator - epoxy coated at the time of manufacture to eliminate the  potential of corrosion.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.

• A sole use circuit is required.
   

OPTIONAL FEATURES/ACCESSORIES:
(At Extra Cost - Lead Time May Apply)

• 6" stainless steel legs.
• Seismic/Flanged legs.
• Kit #1 (9 sets of #1 type tray slides).
• Kit #2 (rod type 1 set covers 1/2 section).
• Kit #3 (6 sets of universal type tray slides).
• Kit #4 (3 chrome shelves and shelf supports)
• Stainless steel (electro polished) shelves.
• Chrome shelves.
• Metal handle (solid doors only).
• Cam lift hinge (solid door models only).
• Electronic temperature control.
• Universal pan slides.
• #1 pan slides.
• #2 or rod style pan slides.
• Curb mountable units.
• Export units available - consult factory.
• Correctional facility options - consult factory.
• Remote cabinets available (contact factory technical services for BTU information).

CLICK IMAGE FOR LARGER VIEW