Heated Cabinet, Roll-In, SS, 1 Section/Door, 37 cu ft

HEATER SYSTEM

Cabinet is designed to provide holding temperatures of 80°F to 180°F (27°C to 83°C). Heating system controlled by exterior on/off switch and temperature control dial.

Two stainless steel, finned tube heating elements (1000 watts each) per section for uniform generation of electric heat. Cabinet comes with a total of 2000 watts.

Cabinet equipped with low-velocity fan to assure even temperature distribution throughout the cabinet. Fans are controllable by exterior on/off switch.

Manually controlled vent located on top of the cabinet for positive humidity control.

Exterior dial thermometer; accurate direct reading of internal cabinet temperature.

CABINET CONSTRUCTION

Exterior - 300 series stainless steel door, front, sides, back and bottom.

Interior- anodized aluminum liner. 300 series stainless floor with coved corners.

Stainless steel breaker cap.

Insulation - entire cabinet structure and solid door are foamed-in-place using high density, CFC free, polyurethane insulation.

Cabinet mounted on a welded, heavy duty galvanized frame rail. Rail dipped in rust inhibiting enamel paint for corrosion protection inside and out.

Frame rail fitted with 6" (153 mm) adjustable legs.

DOORS

300 series stainless steel exterior and door liner. Door opens within cabinet dimension.

Door lock standard.

(3) lifetime guaranteed, cam-lift hinges per door. Full 180 degree open capability with a stay open feature at 120 degrees.

Magnetic door gasket of one piece construction, removable without tools for ease of cleaning.

Door is field reversible.

 

LIGHTING

Incandescent interior lighting; safety shielded.

MODEL FEATURES

True heated cabinets are designed to hold warm baked or cooked food. Cabinets are not designed to heat ambient or cold product.

ELECTRICAL

Unit completely pre-wired at factory and ready for final connection to a 115/208-240/60 Hz. Single phase - 20 amp dedicated outlet.

Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES
Up-charge and lead time may apply.

 

Export units - consult factory.

Prison package options - consult factory.

Metal door handle.

Remote cabinets (condensing units supplied by others), consult factory technical service department for BTU information.

Click Image for Larger View

Rough - In Data

• Model: TA1HRI-1S
• Doors: 1 solid
• Capacity (Cu. Ft.): 37
• # of Shelves: n/a
• Dimensions (Inches):
  • L: 35
  • D: 34-1/2
  • H** : 83-3/4
• Watts: 2000
• Volts: 115/208-240/60Hz/1 phase: requires 3 pole, 4 wire circuit.
• Amps: 8.3
• NEMA Config.: 14-20
• Cord Length (total feet): 9

• This Product is recommended for commercial purposes only.
• Specifications subject to change without notice.
• ** Height does not include 5" for castors or 6" for optional legs.
• ** Height does not include 1" for system mechanical components.