With its patent pending
technology, the
EXTREMEAIR
is 3X
faster - it dries hands completely in 10-15
seconds. This
is accomplished with a powerful blast of warm air
that quickly
breaks up the layer of surface water on a user’s
hands for quick
removal and evaporation.
While all American hand dryers save trees and
reduce landfill
waste - The
EXTREMEAIR
uses up to 80% less energy
than conventional hand dryers.
Overview:
The new GXT high performance automatic hand dryers
are 2-3 times faster than a conventional hand
dryer.
The stylish, compact design saves
95% versus paper towels
and provides great performance while consuming
80% less
electricity. The GXT'S patent-pending
design will provide
many years of trouble-free service.
A recess kit is available for
the GXT-M to reduce the depth
of the dryer to less than 4 inches.
Construction
Features:
– One-piece heavy duty, flame retardant ABS polymer with white finish. Optional one-piece 18 gauge steel cover finished with electrostatically applied, chip-resistant white epoxy finish (M), or chrome plated satin finish (C)..
–
Powerful
series commutated through-flow
discharge vacuum motor/blower with automatic
resetting
thermal protector. 5/8 HP, 20,000 RPM.
–
100% solid state design eliminates
relay contact failures. Microprocessor
controlled infrared
sensor turns dryer on when hands are under the
air outlet.
Dryer turns off when hands are removed. Override
turns
off in 80 seconds if hands are not removed.
–
Constructed of NiChrome resistance
wire with automatic resetting thermostat.
Heating element
operates in the black range for maximum life.
Heating
element is enclosed within blower housing and
therefore
inaccessible to vandals.
–
Two tamper resistant screws secure
cover to steel base. Blower air intake is
shielded for
additional safety.
Dryers should be placed
at least 2 feet apart and at least 12” from
washbasin. Do not install dryer over washbasin.
Automatic dryers should be at least 18” above any
projection which may interfere with the operation of
the automatic sensor.
Hand dryers require a
dedicated circuit (max. 20 amp) and must be
properly grounded. One side of dryer should be
mounted to stud. All
surface mount dryers are provided with conduit
entrances for both
between wall and surface wiring.
Average traffic
washroom......1 dryer per 2 washbasins
Heavy traffic washroom.........1 dryer
per washbasin
54” Bradley sink....................4
dryers per sink
