American GXT Series Hand & Hair Dryers

Model 155-GXT6 - Surface Mounted White ABS Plastic, Automatic Hand Dryer

American Dryer GXT ExtremeAir Series Hand Dryers are both stylish and practical. American Dryer has been providing quality, maintenance free products for over 55 years. These quality dryers come with a 10-year limited warranty. All American Dryer products are made in the U.S.A., but are shipped to over 30 countries around the world. These efficient dryers are designed with your business and our environment in mind.

This commercial hand dryer features a variety of available finishes and mounting styles, with this specific model featuring a white ABS plastic cover and designed for surface mounting.  This hand dryer is 3x faster than other conventional hand dryers, making this the best choice for your business. The ExtremeAir hand dryer is so reliable; it is backed with a 10-year limited warranty. The ExtremeAir hand dryer will completely dry hands in 10-15 seconds! After much review, this highly-efficient commercial hand dryer was found to use 80% less energy than other conventional dryers and is listed by GreenSpec and qualifies for LEED credits. Not only are the ExtremeAir hand dryers more sanitary than paper towels, but your business will save over $1,900 annually. For example, 90 cases of paper towels would cost around $2,025, while operating this efficient dryer will only cost an average of $96. The ExtremeAir hand dryer will pay for itself within the first year of use!

American Dryer backs all of their GXT commercial dryers with a 5-year limited warranty. By choosing the American Dryer ExtremeAir Series hand dryer, you are making the best choice for your business and the environment.

Why buy American Dryer?

The new GXT high performance automatic hand dryers are 2-3 times faster than a conventional hand dryer. The stylish, compact design saves 95% versus paper towels and provides great performance while consuming 80% less electricity. The GXT'S patent-pending design will provide many years of trouble-free service.

Construction Features

• Cover – One-piece heavy duty, flame retardant ABS polymer with white finish. Optional one-piece 18 gauge steel cover finished with electrostatically applied, chip-resistant white epoxy finish (M), or chrome plated satin finish (C).
• Motor – Powerful series commutated through-flow discharge vacuum motor/blower with automatic resetting thermal protector. 5/8 HP, 20,000 RPM.
• Automatic Sensor – 100% solid state design eliminates relay contact failures. Microprocessor controlled infrared sensor turns dryer on when hands are under the air outlet. Dryer turns off when hands are removed. Override turns off in 80 seconds if hands are not removed.
• Heating Element – Constructed of NiChrome resistance wire with automatic resetting thermostat. Heating element operates in the black range for maximum life. Heating element is enclosed within blower housing and therefore inaccessible to vandals.
• Tamper Resistant – Two tamper resistant screws secure cover to steel base. Blower air intake is shielded for additional safety.

General Information on the 155-GXT6 Hand Dryer

• Dryer Placement - Dryers should be placed at least 2 feet apart and at least 12” from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18” above any projection which may interfere with the operation of the automatic sensor.
• Dryer Installation - Hand dryers require a dedicated circuit (max. 20 amp) and must be properly grounded. One side of dryer should be mounted to stud. All surface mount dryers are provided with conduit entrances for both between wall and surface wiring.
• Recommended Quantity Estimation -

  Average traffic washroom..............1 dryer per 2 washbasins
  Heavy traffic washroom..................1 dryer per washbasin
  54” Bradley sink..............................4 dryers per sink

Warranty:  This top-of the-line model comes standard with a 10-year limited warranty