DR Series Automatic Hand Dryer, Satin Stainless Steel Cover, 208-240/50-60

American DR Series Hand & Hair Dryers

Model 155-DR35TNSS - Surface Mounted Automatic Hand Dryer with Automatic Timer and Stainless Steel Cover

Why buy American Dryer?

American Dryer Hand Dryers can achieve up to 95% cost savings versus their paper towel counterparts by eliminating maintenance and operating expenses associated with paper or linen towels.

Description

This American made automatic hand dryer is a stylish mix of quality and affordability.  Affordability not only applies to the initial purchase, but to the long term paybacks as well.  American Dryer has been creating quality hand and hair dryers for over 55 years, so their experience and knowledge along with their commitment to environmental friendliness is insurmountable.  American Dryer’s electric hand dryers will not only provide years of trouble free service, but will save up to 95% over paper towels by eliminating the maintenance and operating expenses associated with paper or linen towels.

The 155-DR35TNSS comes standard with a one piece heavy duty 16 gauge stainless steel cover for exceptional durability.  There are two tamper resistant screws that secure the cover to the base to prevent vandalism.  The automatic sensor in this unit has a 100% solid state design that eliminates relay contact failures.  The hand dryer will automatically turn on when hands are placed under the air outlet and will automatically turn off when hands are removed.  There is a built in override that turns the dryer off in 80 seconds if hands are not removed.  The permanently lubricated brushless induction motor is nearly maintenance free.  The motor has an automatic resetting thermal protector as well. 

American Dryer is certain this unit will be trouble and maintenance free and therefore backs this wall mounted hand dryer with a standard 10-year limited warranty.

Construction Features

• Cover – One piece heavy duty 16 gauge steel or optional 18 gauge type 304 stainless steel (SS)..
• Finish – Electro statically applied white enamel. Resistant to chipping and cleaning agents. Brushed stainless steel finish optional
• Tamper Resistant - Tamper resistant screw secures cover to base. Air intake vents are shielded for additional safety.
• Motor - Permanently lubricated, maintenance free,
  brush less induction motor with automatic resetting
  thermal protector. 1/10 HP, 3200 RPM.
• Nozzle & Push Button – Chrome plated zinc die castings. 360° revolving nozzle is standard. A fixed nozzle (F) is optional on all models.
• Timer – Push button models use a heavy duty cam-operated timer with oversized electrical contacts for extended life. Turns on with a light touch. Turns off automatically.
• Automatic Sensor – 100% solid state design eliminates relay contact failures. Microprocessor controlled infrared sensor turns dryer on when hands are under the air outlet. Dryer turns off when hands are removed. Override turns dryer off in 80 seconds if hands are not removed.
• Heating Element – Constructed of NiChrome resistance wire with automatic resetting thermostat. Side mounted heating element operates in the black range for maximum life.

General Information on the 155-DR35TNSS Hand Dryer

• Dryer Placement - Dryers should be placed at least 2 feet apart and at least 12” from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18” above any projection which may interfere with the operation of the automatic sensor.
• Dryer Installation - Hand dryers require a dedicated circuit (max. 20 amp) and must be properly grounded. One side of dryer should be mounted to stud. All surface mount dryers are provided with conduit entrances for both between wall and surface wiring.
• Recommended Quantity Estimation -

  Average traffic washroom..............1 dryer per 2 washbasins
  Heavy traffic washroom..................1 dryer per washbasin
  54” Bradley sink..............................4 dryers per sink

Warranty: This top-of the-line model comes standard with a 10-year limited warranty

*Note*

Optional 80 second cycle for hair dryer is available at no additional cost