Turbo Air TPR-67SD-D2 67" Pizza Prep Table w/ Refrigerated Base, 115v

In early 2018, Turbo Air began replacing its models with new ones that are designed to be more efficient and use natural refrigerants. This model has been replaced by the TPR-67SD-D2-N. Here are details about that model:

Super Deluxe Pizza Prep Table, two-section, 20 cu. ft., self-cleaning condenser device equipped, stainless steel top with refrigeration pan rail, (9) condiment pans included, 19-1⁄4" deep removable cutting board, stainless steel interior and exterior, ABS door liner, insulated pan cover, (1) door with recessed handle, (2) stainless steel shelves, (2) drawers with recessed handles, 4" casters, side-mount, self-contained, R290 Hydrocarbon refrigerant, 2⁄3 HP, 115v/60/1-ph, 4.2 amps, NEMA 5-15P, cETLus, ETL-Sanitation

Without the proper cleaning and maintenance, condensers on refrigeration systems can prematurely fail or overheat. Manually cleaning the condensers is time consuming and costly. The Turbo Air TPR-67SD-D2 Super Deluxe Series pizza prep table has a built-in self-cleaning condenser. A rotating brush moves up and down to remove excess dust outward and away from the condenser, effectively preventing dust from accumulating in the first place. The brush also sweeps away dust that has collected on the mesh filter two to three times a day. The mesh filter prevents dust from getting to the condenser coil fins. The self-cleaning condenser allows the refrigeration system to maintain its highest efficiency while reducing the risk of a premature system failure.

An extra-deep cutting board, measuring 19 1⁄4-inch-deep and 1⁄2-inch-thick, provides plenty of room for cutting up vegetables, meats, and cheeses for pizzas and room for prepping the pizzas before they go in the oven. To ensure the cleanest environment for the food going in the refrigerator on the Turbo Air TPR-67SD-D2 Super Deluxe Series pizza prep table, the interior is constructed of stainless steel and the shelves inside are also stainless steel. When toppings are prepped, they sit in pans where the cold air curtain system flows around the pan to maintain the food temperature under 41 degrees Fahrenheit even when the lids are opened.

Product Details

• Super Deluxe Series pizza prep table
• Balanced, oversized, self-contained refrigeration system
• Self-cleaning condenser allows the system to maintain the highest efficiency while reducing the risk of a premature system failure
• Rotating brush moves excess dust away from the condenser, preventing dust accumulation
• Rotating brush sweeps away dust that has collected on the mesh filter 2-3 times a day
• Mesh filter prevents dust from reaching the condenser coil fins
• Stainless steel exterior with galvanized steel back and bottom
• Stainless steel interior guarantees utmost in cleanliness and long product life
• 2 Stainless steel drawers, each accommodates up to 6-in.-deep, 1⁄6-size pans (drawer pans not included)
• 2 stainless steel shelves
• Front breathing, side mount compressor unit
• Insulated pan cover
• 19 1⁄4-in.-deep, 1⁄2-in.-thick cutting board
• 1 swing, solid door
• Includes 9 pans, 6-in.-deep, standard 1⁄3 size
• 4 in. dia. x 5 in. H swivel casters with locks on the front set
• Cold air curtain system allows cold air to flow all around the food pan area, including underneath, on top of, in front of, and behind the pan
• Air flow creates a cold air-shield around the pan which maintains the food temperature even when the lids are open
• Forced-air refrigeration system maintains the storage cabinet at a constant temperature
• Evaporator fan and stainless steel louver evenly distribute cold air to the food pans and throughout the unit to keep the temperature within the NSF standard 7 requirements
• High-density polyurethane insulation in the entire cabinet structure and solid doors
• Temperature range of 33-41 degrees F for the best food preservation
• Uses R-134A refrigerant
• 2⁄3 HP motor
• 115 V/60 Hz/1 ph, 10.4 A, 9 ft. cord with a NEMA 5-15P plug
• Overall Dimensions: 67 in. W x 32 1⁄4 in. D x 36 in. H (D does not include 3 in. for cutting boards and 1 in. for rear spacers. H does not include 5 in. for casters.)