Turbo Air TPR-44SD-D2 44" Pizza Prep Table w/ Refrigerated Base, 115v

In early 2018, Turbo Air began replacing its models with new ones that are designed to be more efficient and use natural refrigerants. This model has been replaced by the TPR-44SD-D2-N. Here are details about that model:

Super Deluxe Pizza Prep Table, one-section, 14 cu. ft., self-cleaning condenser device equipped, stainless steel top with refrigeration pan rail, (6) condiment pans included, 19-1⁄4" deep removable cutting board, stainless steel interior and exterior, ABS door liner, insulated pan cover, (1) door with recessed handle, (2) stainless steel shelves, 4" casters, side-mount, self-contained, R290 Hydrocarbon refrigerant, 1⁄4 HP, 115v/60/1-ph, 3.2 amps, NEMA 5-15P, cETLus, ETL-Sanitation

The excellent cooling system on the Turbo Air TPR-44SD-D2 Super Deluxe Series pizza prep table maintains the storage cabinet at a constant temperature between 33 and 41 degrees Fahrenheit. The evaporator fan and stainless steel louver allow even distribution of cold air to the food pans and throughout the unit. The cold air curtain system allows cold air to flow around the food pan, which creates a cold air-shield around the pan that maintains the food temperature under 41 degrees Fahrenheit even when the lids are opened. To make servicing the unit easier, the compressor is side mounted, and the front-breathing feature allows the unit to provide high efficiency even in narrow spaces.

Accumulation of dust in the condenser causes premature system failures, and manually cleaning the condenser on a regular basis is costly and time consuming. Since the Turbo Air TPR-44SD-D2 Super Deluxe Series pizza prep table has a self-cleaning condenser, it allows the refrigeration system to maintain its highest efficiency while preventing a premature system failure. A rotating brush moves up and down to remove the excess dust away from the condenser, preventing dust from accumulating in the first place. The brush also brushes off dust that has accumulated on a mesh filter two to three times a day, while the mesh filter keeps dust from reaching into the condenser coil fins.

Product Details

• Super Deluxe Series Pizza prep table
• Self-contained refrigeration system
• Self-cleaning condenser helps reduce the risk of a premature system failure while maintaining its highest efficiency
• Rotating brush removes excess dust away from the condenser, preventing dust from accumulating on the condenser in the first place
• Rotating brush cleans dust off the mesh filter 2-3 times a day
• Mesh filter helps prevent dust from reaching the condenser coil fins
• Insulated pan cover
• Cold air curtain system allows cold air to flow all around the food pan area covering underneath, to the front, top, and bottom
• Unique air flow from the curtain system creates a cold air-shield around the pan, which maintains the food temperature under 41 degrees F even when the lids are open
• Stainless steel interior guarantees maximum cleanliness and long product life
• Stainless steel exterior with galvanized back and bottom
• Compressor is side mounted to make servicing it easier
• Front-breathing feature on the compressor provides high efficiency in narrow spaces
• Forced-air refrigeration system maintains the storage cabinet at a constant temperature
• Evaporator fan and newly designed stainless steel louver allow uniform distribution of cold air to the food pans and throughout the unit to keep food temperature within the NSF standard 7 requirements
• Entire cabinet and solid doors are insulated with high-density polyurethane
• Temperature range of 33-41 degrees F for the best food preservation
• Extra deep cutting board measuring 19 1⁄4-in.-deep and 1⁄2-in.-thick
• 2 drawers, each accommodates up to 6-in.-deep, 1⁄6-size pans (pans not included)
• Includes 6 pans, standard 1⁄3 size, 6-in.-deep
• 4 in. dia. x 5 in. H swivel casters with locks on the front set
• Uses R-134A refrigerant
• 1⁄4 HP motor
• 115 V/60 Hz/1 ph, 6.3 A, 9 ft. cord with a NEMA 5-15P plug
• Overall Dimensions: 44 in. W x 32 1⁄4 in. D x 36 in. H (D does not include 3 in. for cutting boards and 1 in. for rear spacers. H does not include 5 in. for casters.)