Click to view larger image of 042-S152403
Image may not depict product color, inclusions, or accessories.
KaTom Price: $1,796.30
Retail Price:You Save: 45%
Priced Per: Each
Sales tax to be added where applicable.
Imperial Electric Booster Water Heaters Model S15 240v / 3pH, 15kW
The Hatco Imperial Electric Booster Water Heater combines quality construction and rugged dependability to provide up to 573 GPH (2169 LPH) of sanitizing rinse water. Storage capacity is 16 gallons(60 liters).
- Features
- Castone® lined tank with a 10-year limited warranty.
- Features include a temperature/pressure relief valve and gauges, a high-temperature limit control, indicator light, on-off switch, and allow-water cut-off to prevent element burnout due to a low water condition.
- Features include a temperature / pressure relief valve, a pressure reducing valve, two temperature / pressure gauges, a high-temperature limit control, pilot indicator light, on-off switch, and a low-water cut-off to prevent element burnout due to low water condition.
- Each Booster has a built-in heat trap and fiberglass insulation to minimize heat loss.
- Hatco electric booster heaters are factory pre-plumbed and pre-wired with calibrated immersion thermostat and high-temperature limit switch.
- A stainless steel front panel and powder-coated silver-gray hammer-tone body is standard on all Imperial models.
For items shipping from our warehouse in Tennessee we are required to collect sales tax for orders shipped to or billed to addresses within Tennessee. For Hatco items shipping direct from the Hatco warehouse we are required to collect sales tax for orders shipped to California, Florida, Louisiana, Michigan or Wisconsin. Sales tax will show on your online invoice on only the Tennessee addresses and will be added before your credit card is charged for the other states.
Consult the product specification sheet for options or other voltages that may be available at additional cost.
To obtain pricing for optional accessories and/or voltages, please use the feedback form below, contact customer service at 800-541-8683, or use our 
.
Product Specifications
- Printable Spec Sheet
- Crated Weight: 200.00 lbs.
- Category: Water Booster Heaters
- Heat: Electric
- KW: 15
- Width (in): 23.5
- 40F Recovery: 151 gph
- 70F Recovery: 86 gph
- Manufacturer: Hatco
- Manufacturer Part Number (MPN): S152403
- Flat Rate: 1
Water Quality Requirements
Incoming water in excess of 3.0 grains of hardness per gallon (GPG) (.75 grains of hardness per liter) must be treated and softened before being supplied to booster heater(s). Water containing over 3.0 GPG (.75 GPL) will decrease the efficiency and reduce the operating life of the unit.
Product failure caused by liming or sediment buildup is not covered under warranty.
| Water Temperature Recovery | ||
| Compact Model | 40 F (22 C) Rise | 70 F (39 C) Rise |
| S15 | 151 gph (572 lph) | 86 gph (326 lph) |
Customer Reviews
Do you have a question or comment about product code 042-S152403?
Type your question here to receive an answer by email or request a phone call.
To verify that you are a human visitor, please answer:
