Powermite Booster Heater, 3.2 Gal, 58,000 BTU
Hatco - Model 042-PMG60
KaTom Price $4,278.40
Priced Per: Each
Retail Price: $7,640.00
You Save: 44%
Quantity in Basket: none
You must add current product to shopping cart to correctly estimate total shipping costs. Shipping estimation is for entire cart contents.
Powermite Gas Booster Water Heaters
|
Model 042-PMG60 58,000 BTU/HR The Hatco Powermite PMG-60 Gas Booster Water Heater provides dependability and functionality for your food service business. This PMG-60 commercial water heater is best used for a single tank, door type dishwashing operation. Hatco booster heaters provide 180 degree Fahrenheit hot water to sanitize your kitchen products. This efficiently designed water heater will fit perfectly under the dish-table or near the dishwasher, to minimize the heat loss that tends to occur when commercial heaters are installed in other isolated locations. This Hatco booster heater has a 58,000 BTU heating capacity and a 3.2 gallon storage capacity to meet all your dishwashing needs. This unit can vent safely into any room, however local venting codes should be consulted and followed. The stainless steel tank, front, and top minimize cleaning and maintenance time by reducing the amount of dents and scratches to your unit. The sides and back of this commercial heater are powder-coated, but are also available in stainless steel for an additional cost upon request. The PMG-60 features eight blade type burners, a finned tube copper heat exchanger, and spark to light standing pilot light. The easy-to-read temperature/pressure relief valve and low-water cut-off valve are easily accessible. This Powermite water heater comes standard with a pressure reducing valve, which automatically cuts off the flow of water at a certain pressure. Hatco provides a 1-year warranty on all parts and labor. These American made products are warranted to be free from defects in both materials and workmanship. The PMG-60 Gas Booster Water Heater also features a 5-year warranty on the optional stainless steel tank. This Hatco product is also known in the food service industry as model numbers 042-PMG60, HAT-PMG60, or PMG-60. Water Quality Requirements Incoming water in excess of 3.0 grains of hardness per gallon (GPG) (.75 grains of hardness per liter) must be treated and softened before being supplied to booster heater(s). Water containing over 3.0 GPG (.75 GPL) will decrease the efficiency and reduce the operating life of the unit. Note: Product failure cased by liming or sediment buildup is not covered under warranty. Click Here to view Booster Heater Sizing Chart |
| Water Temperature Recovery | ||
| Model | 40 F (22 C) Rise | 70 F (39 C) Rise |
| 064-PMG60 | 135 gph (511 lph) | 77 gph (292 lph) |
| Specifications | |
| Model | BTU/HR |
| 064-PMG60 | 58,000 |
For items shipping from our warehouse in Tennessee we are required to
collect sales tax for orders shipped to or billed to addresses within Tennessee.
For Hatco items shipping direct from the Hatco warehouse we are required to
collect sales tax for orders shipped to California, Florida, Louisiana, Michigan
or Wisconsin. Sales tax will show on your online invoice on only the
Tennessee addresses and will be added before your credit card is charged for the
other states.
Consult the product specification sheet for
options or other voltages that may be available at additional cost.
Please use the feedback form below or contact customer service at
800-541-8683 to obtain pricing for optional accessories and/or voltages.
Product Specifications
- Printable Spec Sheet
- Crated Weight: 130.00 lbs.
- BTU: 58,000
- Category: Water Booster Heaters
- Heat: Gas
- Width (in): 20-3/8
- 40F Recovery: 135 gph
- 70F Recovery: 77 gph
- Manufacturer: Hatco
- Manufacturer Part Number (MPN): PMG60
Customer Reviews
Average Customer Review: Not yet rated
Write an online review and share your thoughts with others.
There are no reviewsRelated Item(s)
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 12in Long, Male to Male
Model Number: 064-HG2C12
Price: $60.00
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 24in Long, Male to Male
Model Number: 064-HG2C24
Price: $69.00
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 36in Long, Male to Male
Model Number: 064-HG2C36
Price: $78.75
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 48in Long, Male to Male
Model Number: 064-HG2C48
Price: $89.63
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 60in Long, Male to Male
Model Number: 064-HG2C60
Price: $105.75
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 72in Long, Male to Male
Model Number: 064-HG2C72
Price: $120.75
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 12in Long, Male to Quick Disconnect
Model Number: 064-HG4C12
Price: $92.25
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 24in Long, Male to Quick Disconnect
Model Number: 064-HG4C24
Price: $101.25
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 36in Long, Male to Quick Disconnect
Model Number: 064-HG4C36
Price: $111.00
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 48in Long, Male to Quick Disconnect
Model Number: 064-HG4C48
Price: $121.50
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 60in Long, Male to Quick Disconnect
Model Number: 064-HG4C60
Price: $137.63
Quantity in Basket: none
-
Safe-T-Link Gas Connector Hose, 1/2in NPT x 72in Long, Male to Quick Disconnect
Model Number: 064-HG4C72
Price: $153.00
Quantity in Basket: none
Product Categories: Hatco Gas Water Booster Heaters Gas Water Booster Heaters
Do you have a question or comment about product code 042-PMG60?
Type your question here to receive an answer by email or request a phone call.

