|
48" Undercounter Refrigerator,
2 Section / Doors
Photo May Include Optional Accessories!
THIS PRODUCT TYPICALLY SHIPS IN 5 - 10 DAYS OPTIONS & ACCESSORIES:
-
Stainless steel back
-
Plastic laminate on front
-
Additional shelf
-
3.5″ (8.9cm) diameter casters (recommended for under counter)
-
5″ (12.7cm) diameter caster also available
-
Door lock
-
220 volt, 50 Hertz electrical system
Features, Options & Specifications Subject to Change Without Notice
|
STANDARD FEATURES:
-
Exterior Top shall be one-piece, 22-gauge stainless steel with front edge turned down to form nosing and rear edge turned down.
-
Exterior bottom shall be one-piece, 14-gauge galvanized metal. Exterior ends shall be 22-gauge stainless steel.
-
Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf supports. ABS interior is backed by a limited lifetime warranty. Cabinet shall have (4) epoxy-coated wire shelves installed. Base shall be fully insulated with high-density foamed-in-place polyurethane.
-
Doors shall have a 22-gauge stainless steel exterior, with a thermoformed ABS plastic interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door handles shall be black, recessed ABS.
-
Refrigeration Refrigeration system shall use HFC-404A refrigerant. Compressor shall be 1/5 h.p., with condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evaporator coil and temperature control shall be mounted on the interior rear wall of the cabinet. Refrigerant flow shall be controlled by a capillary tube. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) interior cabinet temperature.
-
Electrical connection shall be 115 volt, 60 Hertz, single phase. Unit shall have a 7″ (2.1m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of cabinet, 16″ (40.6cm) above floor, 12″ from left side.
-
Equipment is shipped with loose 6″ (15.2cm) high metal legs with black enamel finish unless mounting is specified on original sales order.
|
