|
94" Freezer Lo-Profile
Equipment Stand,
4 Section/2 Drawers,
Non-Spill Edges
Photo May Include Optional Accessories!
THIS PRODUCT TYPICALLY SHIPS SAME OR NEXT DAY
| OPTIONAL ACCESSORIES: |
- 108 Drawer locks
- 213 *220 volt, 50 Hertz electrical system
* Inclusion of these options will alter the electrical specifications of the unit.
|
|
Up-charge and lead times may apply. |
|
Short Form Specifications: Exterior Top: top is 18-gauge stainless steel, with standard marine edge. Exterior sides and front are 22-gauge stainless steel. Exterior back and bottom are 24-gauge galvanized steel.
Interior: subtop is 22-gauge stainless steel, with foamed-in-place polyurethane insulation. Interior back and bottom are 22-gauge stainless steel. Interior sides are ABS plastic. Unit is supplied with a wall bracket and threaded rod to allow installation of the unit against a solid surface.
Drawer: frames are 14-gauge stainless steel. Drawer slides are 14-gauge stainless steel, with stainless steel bearings. Drawer fronts are 32.00" (81.3 cm) wide, and are 22-gauge stainless steel. Interior of drawer fronts is ABS plastic over polyurethane foam insulation. Each drawer holds (2) 12.00" x 20.00" x 4.00" deep (30.5 cm x 50.8 cm x 10.2 cm deep) pans, supplied by others.
Unit: is mounted on 6.13″ (15.6cm) high adjustable stainless steel legs or casters. Add a °C″ to the model number when ordering with casters.
Refrigeration: system uses HFC-404A refrigerant, and maintains 0°F (-18°C) to -5°F (-21°C) interior cabinet temperature at 100°F (38°C) ambient room temperature. Both remote and self-contained models are standard with electric condensate evaporators.
Electrical Connection: Electrical connections shall be 115 volt, 60 Hertz, single phase.
THE FOLLOWING APPLIES TO F2600 SERIES (SELF-CONTAINED) ONLY:
Self-contained models have a pre-wired condensing unit, a digital thermometer
installed in the removable louver and is supplied with an 8.0’ (2.4
m) cord and plug.
|
