27 in Refrigerated Base, Flat Top, 1 Section, Drawers

MODEL D4427N - 27" Refrigerated Base, Flat Top, 1 Section, Drawers, Front-Breathing Flat Top Refrigerated Bases

Good, Basic, Cold Storage

THIS PRODUCT TYPICALLY SHIPS SAME OR NEXT DAY

Standard Features

• Exterior Top: is one-piece, 22-gauge stainless steel with integral 2.12" (5.1cm) square nosing on the front.
• Exterior Back & Bottom: are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
• Interior Sides: are thermoformed ABS plastic with shelf supported on plugs. Base is fully insulated with high-density foamed in place polyurethane.
• Refrigeration: system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coils and temperature control are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C)
• Electrical Connection: is 115 volt, 60 Hertz, single phase. Unit has an 8" (2.4m) long electrical cord and NEMA 5-15P plug.
• Casters: Equipment is mounted on 2" (5.08cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5" (6.35cm).
• Drawers: have 22-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 14-gauge stainless steel. Drawer slides are 14-gauge stainless steel with stainless steel bearings. Each drawer holds one full size 12" x 20" x 4" deep (30.5cm x 50.8cm x 10.2cm deep). Pans are supplied by others.

Options & Accessories

• 18" wide single tier over-shelf
• Stainless steel finish on back
• Plastic laminate on front
• Additional wire shelves
• Door lock
• Cutting tops/boards " composite or polyethylene
• *220V/50 Hertz electrical system
  * Inclusion of this option will alter electrical specifications of the unit.

Features, Options & Specifications Subject to Change Without Notice

Photo May Include Optional Accessories!