27in Refrigerated Counter, Work Top, S/S top W/Rear Splash

STANDARD FEATURES:

• Exterior top shall be one-piece, 22-gauge stainless steel with front edge turned down to form nosing and rear edge turned up to form a 2" (5.1 cm) thick by 4" (10.2 cm) high backsplash.

• Exterior back and bottom shall be one-piece 24-gauge galvanized metal. Exterior ends shall be 22-gauge stainless steel.

• Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf supports. Base shall be fully insulated with high-density foamed-in-place polyurethane.

• Doors shall have a 22-gauge stainless steel exterior, with a thermoformed ABS plastic  interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door handles shall be black, recessed and shall extend the full length of the top of the door. Cabinet shall have (2) adjustable epoxy-coated wire shelves installed.

• Refrigeration system shall use HFC-404A refrigerant. Compressor shall be 1/5 h.p., with condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evaporator coil and temperature control shall be mounted on the interior rear wall of the cabinet. Refrigerant flow shall be controlled by a capillary tube. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) interior cabinet temperature.

• Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall have a 7’ (2.1 m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of cabinet, centered left to right, 16" (40.6 cm) above floor.

• Equipment shall be mounted on 6" (15.2 cm) high metal legs with black enamel finish.