|
Photo May Include Optional Accessories!
THIS PRODUCT TYPICALLY SHIPS SAME OR NEXT DAY
| OPTIONAL ACCESSORIES: |
- Stainless steel back
- Laminate facing (full front)
- Laminate end
- Laminate back
- Tray racks
- Cutting board (.5″ x 20″)
- Legs, set of fourLegs, set of six
- Cheese grates with removable catch pans
- 18″ deep single tier stainless steel overshelf
- 19" wide refrigerated drawers (2) high, holds 6" deep pans
- 19″ wide refrigerated drawers (3) high, holds 4″ deep pans
- 24″ wide refrigerated drawers (2) high, holds 6″ deep pans2
- 24″ wide refrigerated drawers (3) high, holds 4″ deep pans
- 7″ wide refrigerated drawers (2) high, holds 6″ deep pans
- 27″ wide refrigerated drawers (3) high, holds 4″ deep pans
- 32″ wide refrigerated drawers (2) high, holds 6″ deep pans
- 32″ wide refrigerated drawers (3) high, holds 4″ deep pans
- Lock
- *220V/50 cycle electrical system
* Inclusion of this option will alter the electrical specifications of the unit
- Additional shelf (specify door size)
|
|
Up-charge and lead times may apply. |
|
Short Form Specifications: Exterior Top: Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has a mechanically cooled refrigerated raised rail at the rear with openings to accommodate pans (provided by others). Rail interior is 22-gauge stainless steel. Raised rail openings have 20-gauge stainless steel removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rail. Temperature in top openings maintains 33°F (1°C) to 41°F (5°C) with pans recessed 2″ (5.1cm) at 86°F ambient room temperature, meeting NSF 7 requirements.
Exterior Back & Bottom: are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Base Interior: Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25″ (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2″ (5.1cm) high density foamed in place polyurethane. End of base has a machine compartment with condensing unit installed.
Doors: 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner..
Refrigeration: HFC-404A refrigerant. Cabinet has a blower coil assembly with expansion valve (1) on 48″, 60″ and 72″ models, located in coil housing. Base is equipped with independently controlled thermostat, solenoid valve and condensate evaporator. Refrigerated base maintains temperature of 36°F (2°C) to 40°F (4°C). Recessed on/off switches for rail and base are located behind the hinged louver door.
Electrical Connection: 115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8″ (2.4m) cord and plug.
Casters: Equipment is mounted on 5″ (12.7cm) diameter casters; overall height of casters is 6.13″ (15.6cm).
|
