LCA-2 LP Liquid Coffee Ambient Dispenser, Scholle 1910LX Connector, 25:1-100:1

Bunn-o-Matic - Model 021-388000000

021-388000000

Click to view larger image of 021-388000000

Image may not depict product color, inclusions, or accessories.

Bookmark and Share

KaTom Price: $1,304.73

Retail Price: $2,660.00

You Save: 51%

Priced Per: Each


Sales tax to be added where applicable.

Features:

  • Attractive appearance with shorter profile.
  • Dispense over 120 (5 oz.) cups per hour.
  • Accommodates two .5 gallon bag-in-box (BIB).
  • Serves two coffee products and hot water.
  • Refill LED lights alert the operator when more concentrate is needed.
  • Rinse LED lights alert the operator cleaning is needed.
  • Set up for continuous dispense (by the cup) for self-serve applications or portion control to fill cups or carafes.
  • Sanitation listed by ETL to NSF Standard 18 and safety listed by ETL to UL Standard (UL 197) and CSA Standard.
  • Scholle 1910LX connector type.
  • This product typically ships in 5 - 10 days.
  • Features, Options & Specifications Subject to Change Without Notice.
 
Back to top

Product Specifications

  • Printable Spec Sheet
  • Crated Weight: 65.00 lbs.
  • Brewing Source: Liquid Coffee Concentrate
  • Capacity: 120 - 5 oz/ hr
  • Category: High Volume Coffee Systems
  • Concentrate Requirements: Room Temperature
  • Connector: Scholle 1910LX
  • Height (in): 23.2
  • Manufacturer: Bunn-o-Matic
  • Also Known As: LCA-2 LP, 38800.0000 LCA2LP, 38800-0001, 388000000, BUNLCC2, BUN388000000, 234LCA2LP
  • Manufacturer Part Number (MPN): 38800
  • Bunn Model: LCA-2, LP
  • Product #: 38800.0000
  • Dispense Rate: 1.7 oz.
  • Product Ratios: 25:1 - 100:1
  • Connector Type: Scholle 1910LX
  • Volts: 120
  • Amps: 12
  • Tank Heater Watts: 1425
  • Total Watts: 1440
  • Cord Attached: Yes
  • Dimensions: 23.2" H x 15.78" W x 20.9" D
  • Electrical: 120V model requires 2-wires plus ground service rated 120V, single phase, 60 hz.
  • Plumbing: 20-90 psi (138-621 kPa) from a 1/4" (6.35 mm) or larger supply line. Unit requires a 1 GPM line flow capacity. A shutoff valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce pressure to 50 psi. Supplied with 1/4" (6.35 mm) male flare fitting.
Back to top

Customer Reviews


Back to top

Related Item(s)

Back to top

Do you have a question or comment about product code 021-388000000?

Type your question here to receive an answer by email or request a phone call.

To verify that you are a human visitor, please answer:

Submit your Question Submit your Question