LCA-2 Liquid Coffee Ambient Dispenser, Scholle 1910LX Connector, 45:1-100:1
Bunn-o-Matic - Model 021-344000001
SKU: 34400.0001
Shipping Weight: 83.00lbs.
Sold As: Each
Shipping Weight: 83.00lbs.
Sold As: Each
Warranty restrictions may apply. Contact Customer Service for additional details.
KaTom Price: $1,803.00
Retail Price:You Save: 50%
Sales tax to be added where applicable.
Model 34400.0001 - LCA-2 Liquid Coffee Ambient Dispenser
Features:
- Attractive appearance and narrow 12" (30.5 cm) width.
- Dispense over 125 - 5 oz. (148 ml) cups per hour with a 120 volt, 15 amp electrical connection.
- Uses 1/2 gallon (1.9 liters) and most 1 gallon (3.8 liters) bag-in-box (BIB) containers.
- Insulated product cabinet assures maximum product life.
- Refill or rinse LED lights alert the operator for concentrate or cleaning.
- FlavorGard technology continuously monitors extract-to-water ratio and assures flavor consistency.
- Easy-to-program one touch portion control model available.
- Sanitation listed by ETL to NSF Standard 18 and safety listed by ETL to UL Standard (UL 197) and CSA Standard (C22.2 No. 109 - model LCR-2C)
- This product typically ships in 5 - 10 days.
- Features, Options & Specifications Subject to Change Without Notice.
Product Specifications
- Printable Spec Sheet
- Crated Weight: 83.00 lbs.
- Brewing Source: Liquid Coffee Concentrate
- Capacity: 125 - 5 oz/ hr
- Category: High Volume Coffee Systems
- Concentrate Requirements: Room Temperature
- Connector: Scholle 1910LX
- Height (in): 30
- Manufacturer: Bunn-o-Matic
- Also Known As: LCA-2, 34400.0001, LCA 2, 344000001 LCA2, 34400-0001, BUNLCA-2, 234LCA-2
- Manufacturer Part Number (MPN): 34400.0001
- Bunn Model: LCA-2
- Product #: 34400.0001
- *Product Ratio 1.8 oz: 45:1 - 100:1
- *Product Ratio 2.5 oz: 65:1 - 100:1
- Connector Type: Scholle 1910LX
- Volts: 120
- Amps: 14.2
- Heater Watts: 1500
- Cord Attached: Yes (NEMA 5-15P)
- Dimensions: 30" H x 12.2" W x 24.9" D
- *Unit shipped with dispense rate set at 1.8 oz./sec. Dispense rate increases to 2.5 oz./sec. if restrictor plug is removed.
- Electrical: Model requires 2-wires grounded service rated 120V, single phase, 60 Hz.
- Plumbing: 20-90 psi (138-621 kPa) from a 3/8" (10 mm) or larger supply line. Unit requires a 2.2 GPM line flow capacity. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce pressure to 50 psi. Supplied with 3/8" (10 mm) male flare fitting.

View Larger

